Has anyone else taken out there cams to do a head gasket or am I the only stupied one? Is it possible to do a headgasket on our cars WITH OUT removing the cams?

Greg Williamson
1999 Eclipse GS "Sport" (Sold)
Star Stage III
12.817 @ 109.36

No.



________________________________________________________________________________________
current status - No 3rd Gear synchro


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

>No.

Bullshit. it is very much possible and even easy. All you need is a ratchet with an extension, and posibly a swivel head attachment for it. if you don't take the cams out, you can't get the head bolts out, but the head will come off just fine. Our stock headbolts are fairly stout, and i've never felt uncomfortable reusing them.

So yes, it's possible. it's a waste of time to take the cams out, IMO.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

Fine, IMO, NO.

And I also wouldn't reuse the headbolts either but again, that's my opinion.

It's also my opinion that you should have the engine balanced when rebuilding, Dino feels otherwise. Everyone has their opinion.









________________________________________________________________________________________
current status - No 3rd Gear synchro


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

he has spoken

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

My engine is getting balanced. And I am using the stock bolts.

Dave
05 Ford F150 SuperCrew FX4

Hey Dave, since you are looking to daily drive close to 15 psi, you should look in to getting the ARP studs.



________________________________________________________________________________________
current status - No 3rd Gear synchro


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

But don't you have to modify the head for those ARP studs?

http://www.hadesomega.info -car specz and movies 95 Eclipse RS | 76' 280Z | 89' MR2 | 99 Neon | 91 Zephyr
Who sez FF can't drift?

how long of a process is to to change the head gasket? cause on my dads beemer it wasnt really too bad...

Yeah for $35 I see no reason not to buy new head bolts. But to change head bolts there is no way to remove them without removing the cams. I'm with Kyle, it's apart... balance it.

So to answer your question, can it be done? Yes, I loosened them hoping to snake the bolts around the cams. But couldn't. Would I do it that way? No, because I will rpelace the bolts.

Una salus victus.



Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All motor in the making.

Injen CAI, 55mm TB, P&P Intake Manifold, Hooker Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730, Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: P&P Milled Head, Rear Disc Brakes, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

Wheres a good place to get the arp head bolts? I need them fast since my head and block go into the machine shop tomorrow.

Dave
05 Ford F150 SuperCrew FX4

I've done it a couple of times

A.D.P.
"...If you do too much, people become dependant. If you do to little, people loose hope. If you do it right, people won't be sure you've done anything at all."
bring it on............

A.D.P.
"...If you do too much, people become dependant. If you do to little, people loose hope. If you do it right, people won't be sure you've done anything at all."
bring it on...........