I was just wondering..
Why is our 420A motor "reversed" compared to cars like Neons, Cirruses, Breezes and all those other car?
Did Mitsubishi want that?
Did Mitsubishi have any role in designing the 420A?
Thanks

"Yes, I really do want to get banned. I no longer want to spend hours upon hours online anymore. This site is great and all, but I don't want to come online anymore. I suck, period. Ban me, please.

Thank you.

-Tahleel"

>I was just wondering..
>Why is our 420A motor "reversed" compared to cars like

It is not. The block sits exactly the same. it is the head that is reversed.

>Neons, Cirruses, Breezes and all those other car?
>Did Mitsubishi want that?

See below

>Did Mitsubishi have any role in designing the 420A?

No.

>Thanks

Welcome

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

Don't know really why it is reversed in the other 420A cars. But be thankful it's the way it is facing in our cars, much easier to bolt on the turbo Also, as far as i know, the 420A was designed by Chrysler, and had contracts with Mitsu to supply their cars with the 420A, or something along those lines...

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

>Don't know really why it is reversed in the other 420A cars.
>But be thankful it's the way it is facing in our cars, much
>easier to bolt on the turbo

except that it's a less heat efficent design.. cause the intake is in the back.. you get the most hot air blowing over the parts (from the radiator, exhaust, and head) while in the neon's and such.. the intake is in the front and the air is only heated by the radiator.
keep in mind i'm not talking about the air your motor intakes 'into' the engine.. but the air the blows over the engine parts.

97' Eclipse RS (kinda)

Present mods:
HRC stage III turbo kit (12 psi street, 25 psi track) / HKS 2 1/2" cat back exhaust w/burnt cat / 16" wheels w/Yokohomo tires (215/40) / 420A engine w/ tooled crank, billet crower rods, and 8.5:1 JE pistons / Head ported and polished, 3 angled valve job
Power-stop brakes w/axis pads / Ebachi Pro lowering kit (1.8") / MSD DIS-2 ignition system w/turbo retard

Near Future:
Stand-alone fuel system / 550cc injectors, and fuel rail / TEC III fuel/ecu system / 17” Hart racing wheels / KYB AGX struts, w/ upgraded anti sway bars / Rear brake conversion (front to rear, Brembo in front)

Jay-
wakbrd99@aol.com

97' Eclipse RS (kinda)

Present mods:
HRC stage III turbo kit (12 psi street, 25 psi track) / HKS 2 1/2" cat back exhaust w/burnt cat / 16" wheels w/Yokohomo tires (215/40) / 420A engine w/ tool

all the others are backwards. Just b/c they felt like making people like you ask. I dunno. Good question.

The 420a in the Avenger is in the same place as ours.
The AEM CAI part# is the same and most header part#s are the same.
In fact, from the front seats all the way up is the same.
The Eclipse and the Avenger are about the same damn car just a different body.


AEM Cold Air Intake
(Optional) Air Bypass Valve
2.5" Custom Cat-Back
(Optional) Testpipe
Pacesetter Header
A/FX Underdrive Pulley
A/FX Bored Throttle Body
S-AFC
Weapon R Coilovers
Arospeed Strut Bars
Grillcraft Grills
NGK Plugs & Wires
Custom Stuff

On the Shelf:
AEM Tru Time Cam Gears
Gauges & Pillar

AEM Cold Air Intake
(Optional) Air Bypass Valve
2.5" Custom Cat-Back
(Optional) Testpipe
Pacesetter Header
A/FX Underdrive Pulley
A/FX Bored Throttle Body
S-AFC
Weapon R Coilovers
Arospeed Strut Bars
Grillcraft Grills
NGK Plugs & Wires
Custom Stuff

On the Shelf:
AEM Tru Time Cam Gears
Gauges & Pillar

"Natty Ride"


http://dirty.thisfreedumb.com/

Our 420a's are the right way! Neons are backwards!!! JK!!!

Chris Jones
1997 Dodge Avenger ES 5spd
"Racing Your Honda Is Like Running In The Special Olympics.....Even If You Win You're Still Retarded!!!

Chris Jones
1997 Dodge Avenger ES 5spd
"Racing Your Honda Is Like Running In The Special Olympics.....Even If You Win You're Still Retarded!!!

size and shaping of body and where the motor mont locations have to be might play a big part in the way the motor has to go.

My thoughts are, because of the way the suspension and frame work run on the Ecllipse compared to the neon you could not have the exhaust in the back of our car. There are frame rails and steering rack etc in the way. The motor would have to be moved forward to make it work. And sincec the car was more concerned with the 4G63(IMO) they reworked the 420A to fit. Again this is only my theory, from a guy who didn't finish his engineering degree, so take it for what it's worth.

Una salus victus.
It's not about being invincible, it's about being ready; for anything.



Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: P&P Intake Manifold 1/2, P&P Milled Head, Rear Disc Brakes, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.