Does anyone have a diagram of the cam shaft and its timing points. I had the cam gears changed and the valves checked, but now my car won't start. The fuel pressure regulator reads about 20 psi and then bleads off. Would this be caused by the cam shafts not being put in right? I really need help soon. My wife is going to have a baby soon and I can't keep taking her car to work because of it. PLEASE HELP!!!
#21617, "RE: Cam Shaft question???" In response to Reply # 0
>I had the....
So, you didn't do it yourself? I'd take it back if you didn't do it yourself. It's standard practice to test the engine after a job like that.
Anyway, It sounds like you want to make sure that the timing was set correctly. If you're going to do it yourself, definately have a manual at hand. I switched my cams using the Chilton manual. Dino hosts a copy of the Factory manual at http://www.heavenz-not-0verflowing.com/files There are some good pics in there as well.
You'll need to take the timing belt cover off to check it. It's not really a job for someone whos unfamiliar with wrenching an engine.
95 Eclipse RS : 5 speed Gude cams : Test pipe : CAI : Dual air horns incomming - lower strut bars
Search
Printer-friendly copy
1 User in Chat
