I read that someone was off by a tooth but never got code 11. I did my own timing betl and never got the code either. but could it be off?

My car idles is not so good(never wants to die)but goes up and down
vac goes back and forth from 13-11 at idle
When crusin vac is steady along with rpm

Is it worth checking marks?
Thanks for you help

venomtalon@aol.com

Performance Mods: Custom CAI, Jeep 60mm TB, Ported Intake Manifold with Jeep TB match, 5 angle valve job, Head milled .020, Regrind Cams, PT Lifters and Rockers, AEM Cam Gears, OBX Wires, NGK Plugs, AFX UDP, OBX Header, OBX

i think mine is off one tooth as well. i am having the same issue as you. but it seems maybe i am having better topend.
later

2GNT #1865
2006 Yamaha YZF R6 (Blue/Black)
2005 Honda CBR 600 RR (Blue REPSOL)
2003 BMW 325I Premium/Sport Package
2003 Honda CBR 600 RR (sold)
1998 Mitsubishi Eclipse RS (sold)
Shuwa's links:
http://www.facebook.com/Shuwa29
http://s16.photobucket.com/albums/b50/shuwa29/



DarkOne> but we all have that inner ricer that is just dying to come out sometimes...

My timing belt wasn't tensioned right and it caused a bad idle. I didn't get a CEL.



Eric Madden

yeah its worth checking out. Its most likely the source of your bad idle problems. btw also check your hoses for leaks. hope this helps.

95 GST | So-Cal