I was trying to change my trany fluid tonight but only about 1 quart came out. I took out the drain plug and the fill plug but fluid only came out of the fill hole. I dont know what is going on but it does not make sense. I tried to jack up the back of my car and everything. not a drop out of the drain plug. any help.....

venomtalon@aol.com

Performance Mods: Custom CAI, Jeep 60mm TB, Ported Intake Manifold with Jeep TB match, 5 angle valve job, Head milled .020, Regrind Cams, PT Lifters and Rockers, AEM Cam Gears, OBX Wires, NGK Plugs, AFX UDP, OBX Header, OBX

Try jacking up the car on the passenger side to get the fluid over to the side with the plug and then jack up the drivers side to pour it out.


________________________________________________________________________________________
current status - No 3rd Gear synchro


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

I tried that. I dont know what i'm doing wrong. I just gave up on it and filled it back up anyway. It just pisses me off that everything is a hassle.

venomtalon@aol.com

Performance Mods: Custom CAI, Jeep 60mm TB, Ported Intake Manifold with Jeep TB match, 5 angle valve job, Head milled .020, Regrind Cams, PT Lifters and Rockers, AEM Cam Gears, OBX Wires, NGK Plugs, AFX UDP, OBX Header, OBX

you sure you took out the fill plug? and not a bolt for something else.. ?

mine did the same thing to me i had mine on a lift and nothing came out of the drain hole and i have the book so i know it was right, well i figured it was empty or something but when i filled it up it only took about 1/2 -1 quart so does anyone know why it does this

I edited to the wiki!