#20365, "RE: I NEED HELP WITH MY UDP!" In response to Reply # 0
Believe it or not, the body mount bolts from a chevy truck are an identical match. I used on my install, and worked great. You should be able to find plenty at your local junkyards. Just look for the newer body style chevy or gmc truck, i know for a fact the extended cab ones are an exact match. Its the bolts that are under the car, that attach the frame and the body.
13.5 @108 MPH-2.2 60ft(stupid FWD!) S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential fuel injection) My webpage: http://eclipsed4evr.home.comcast.net -1998 Mitsubishi Eclipse RS-T- "Toy" -1992 Plymouth Laser Turbo AWD(SOLD) -2000 Honda CR-V(daily)
#20366, "RE: I NEED HELP WITH MY UDP!" In response to Reply # 1
I LET MY DAD TRY TO GET THE PULLEY OFF AND HE PUT A SOCKET EXTENSION IN THE UDP PULLEY HOLE AND PUT THE PULLEY PULLER OVER IT AND NOW WE CANT GET THE SOCKET OUT! PLEASE HELP!!!!!!!!!!!!! Optima deep cycle battery NGKs Bosch wires -:x painted calipers GReddy headers-custom flanges Monza pipe_Arospeed Bomb muffler sidemarkers-blue 2 impp 12's BOLT 300 watt amp-DONT ASK<DONT TELL MA AUDIO Digital 1 farad CAP Bandpass box 2002 model Sony Xplod CD player--All props on audio to-E-Rock.
#20367, "RE: I NEED HELP WITH MY UDP!" In response to Reply # 2
Well that'll teach you to stick things where they dont belong. Is the socket jammed in there?? were you able to get the old pulley off? You might try an extendable magnet if the socket isnt jammed in there, if it is then I dunno.
#20369, "RE: I NEED HELP WITH MY UDP!" In response to Reply # 4
i did the same thing and tried using a rubber hammer and that didn't work. he had a tool that he used to yank it out. it's a couple of pieces too. one piece is a rod with threads on the end. the rod has a metal handle that slides back and forth. the thread piece has a few holes in it for putting bolts through. they slide in so make sure you have bolts, the final piece is kindof like a vise and has to threaded holes for the bolts. we put that around the extension, attached the two bolts and the slide the handle down the rod as hard as we could until it came out. i forgot what it was called though
#20370, "RE: I NEED HELP WITH MY UDP!" In response to Reply # 5
OH GOD!, We got the extension out......THE END OUF THE EXTENSION BROKE OF IN THE CRANK SHAFT!.....DOES ANYONE KNOW WHAT TO DO.
UDP-A REAL PAIN IN THE ASS Optima deep cycle battery NGKs Bosch wires -:x painted calipers GReddy headers-custom flanges Monza pipe_Arospeed Bomb muffler sidemarkers-blue 2 impp 12's BOLT 300 watt amp-DONT ASK<DONT TELL MA AUDIO Digital 1 farad CAP Bandpass box 2002 model Sony Xplod CD player--All props on audio to-E-Rock.
Search
Printer-friendly copy
1 User in Chat
