| Go back to previous topic | |
| Forum name | Performance/Engine |
| Topic subject | I NEED HELP WITH MY UDP! |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=20364 |
|
20364, I NEED HELP WITH MY UDP! Posted by BLACKWIDOWDSM, Apr-15-02 12:12 PM I just purchased a AFF UDP and I bent my pulley bolt!! Where can i get another one? PLEASE!!!HELP | |
|
20365, RE: I NEED HELP WITH MY UDP! Posted by XtremeRS, Apr-15-02 12:20 PM Believe it or not, the body mount bolts from a chevy truck are an identical match. I used on my install, and worked great. You should be able to find plenty at your local junkyards. Just look for the newer body style chevy or gmc truck, i know for a fact the extended cab ones are an exact match. Its the bolts that are under the car, that attach the frame and the body. | |
|
20366, RE: I NEED HELP WITH MY UDP! Posted by BLACKWIDOWDSM, Apr-15-02 01:23 PM I LET MY DAD TRY TO GET THE PULLEY OFF AND HE PUT A SOCKET EXTENSION IN THE UDP PULLEY HOLE AND PUT THE PULLEY PULLER OVER IT AND NOW WE CANT GET THE SOCKET OUT! | |
|
20367, RE: I NEED HELP WITH MY UDP! Posted by fasterGS, Apr-15-02 03:03 PM Well that'll teach you to stick things where they dont belong. Is the socket jammed in there?? were you able to get the old pulley off? You might try an extendable magnet if the socket isnt jammed in there, if it is then I dunno. | |
|
20368, RE: I NEED HELP WITH MY UDP! Posted by vegasdsmr, Apr-15-02 08:57 PM rubber hammer?? good luck mayn.. i had many ordeals w/mines, thats why i made a how-to for yall to read and not have the probs i did ;-) | |
|
20369, RE: I NEED HELP WITH MY UDP! Posted by bedlam32570, Apr-15-02 10:25 PM i did the same thing and tried using a rubber hammer and that didn't work. he had a tool that he used to yank it out. it's a couple of pieces too. one piece is a rod with threads on the end. the rod has a metal handle that slides back and forth. the thread piece has a few holes in it for putting bolts through. they slide in so make sure you have bolts, the final piece is kindof like a vise and has to threaded holes for the bolts. we put that around the extension, attached the two bolts and the slide the handle down the rod as hard as we could until it came out. i forgot what it was called though | |
|
20370, RE: I NEED HELP WITH MY UDP! Posted by BLACKWIDOWDSM, Apr-15-02 11:28 PM OH GOD!, We got the extension out......THE END OUF THE EXTENSION BROKE OF IN THE CRANK SHAFT!.....DOES ANYONE KNOW WHAT TO DO. | |
