when i replace it do i need to use that blue silicon(or what ever) stuff??

also how lond do i need to wait till i can drive it again

http://www.geocities.com/shadyporshe851proof//null

mods:
star stage III clutch
full exhause
cai
sparkplugs(needing new ones, any ideas?>
platnum plus window tint
all black interior
altezas

future mods(in no particular order):
engine rebuild
turbo.....
lower it
wheels
seats
exhaust
piant job
turbo wing
hood
body kit
neons all around
projectors
new altezas
new stereo equipment
and more that will be kept secret for now

I used Permatex brand High temperature Copper sealant on the whole thing and it's sealed fine. I do need to change my little spark plug hole gaskets since one is leaking so I'll use some on there too. I got the stuff at pepboys.


________________________________________________________________________________________
current status - No 3rd Gear synchro


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

I would use the black instead of blue. You get better oil resistance. Make sure to only use a little, if you goop too much on there it won't seal correctly. Also prep the surface area to make sure it's nice and clean.



97 Eclipse GS

OBX type H Cat-Back
Maxspeed Short Ram intake
Pacesetter header
Neuspeed Springs 1.5 inch drop
Progress Tech camber kit
16" Konig Monsoons
Coming soon (HRC Stage I)

97 Eclipse GS (SOLD)
91 Galant VR4 on the way


Honda, taking the "R" out of "shirt".

so i have to use this stuff?? and do i put it on the whole gasket or just the spots that are shown in the mods pages?

i need to know how long i have to wait till i can drive it again cause it says 12-24 hours and i just can't do that between work and school. so how long is long enough?

http://www.geocities.com/shadyporshe851proof//null

mods:
star stage III clutch
full exhause
cai
sparkplugs(needing new ones, any ideas?>
platnum plus window tint
all black interior
altezas

future mods(in no particular order):
engine rebuild
turbo.....
lower it
wheels
seats
exhaust
piant job
turbo wing
hood
body kit
neons all around
projectors
new altezas
new stereo equipment
and more that will be kept secret for now

I coated mine and then drove after 1 hour and it's not leaking so I'm good. Of course with how often my VC comes off I can't afford to buy gaskets all the time so I reuse then many times over and just coat the crap out of it with the Ultra copper RTV sealant.


________________________________________________________________________________________
current status - No 3rd Gear synchro


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

I just used the sealant to tack the gasket to the valve cover, and then I put a very thin layer on the head where it meets the gasket.


97 Eclipse GS

OBX type H Cat-Back
Maxspeed Short Ram intake
Pacesetter header
Neuspeed Springs 1.5 inch drop
Progress Tech camber kit
16" Konig Monsoons
Coming soon (HRC Stage I)


Honda, taking the "R" out of "shirt".

97 Eclipse GS (SOLD)
91 Galant VR4 on the way


Honda, taking the "R" out of "shirt".

i didnt use it... my reason: being that it will make it uneven and may cause it to leak more then with it on somewhere else you dont have to use it...

Boca Raton, Florida
95 Eclipse GS- sold
99 Eclipse GSX- 386awhp
98 Eclipse GS- sold
92 Prelude