I know that there is a bend in the gsx piping at the rear axle that will not allow us to use it. I was wondering, though, is the piping the same size? If it is then we could just weld on the muffler, correct?

AEM CAI/ AFX UDP/ GST Muffler/ Magnecors/ NGK plugs/ Intrax Springs/ Symbroski Shift Kit

i wud think so, if not, any muff shop can use an adapter to fix it...
wait til sumone who knows replies tho...

good luck

03 srt-4 13.130@112.47mph (n2o, stock turbo, 10/2003)
now: 20g, portfueler, bpu+++ (track/dyno times tbd...)

i farted on your wiki

well i know for sure stock to stock it will not fit. i got the greddy power extreme made for an X and i had a muff shop install it. it has 3 inch piping and they fit it onto my stock piping. so i dont see y they couldnt for you. you should have no prob having a muff shop install that. l8r


"Proud to be, a 2gnt"


-mitsuman

Turbo:
1. HRC STG 2
2. Blits SS BOV
3. HKS Turbo timer

Exhaust:
1. Greddy Power Extreme

Ride:
1. Motegi MR7 17'' wrapped
in yokohama A550v
235/45/17

Sound:
1. sony xplod cdxm620 deck
2. 2 10'' audiobahn subs
3. nice shiny audiobahn
amp

In room:
1. blitz front end(thnx 2
eclipse804)
2. H&R sport springs(thnx 2
eclipse804)

Fun mods:
1. "Nozzel mod"

Wanted:
1. to much ish to list

-mitsuman 95 GS 5-spd w/97-99 front end
Repin The SoCal 2GNT'ers
mitsuman95@hotmail.com
AIM s/n : mitsuman95gs

its the exact same muffler that is on the gs-t its just the piping has different bends to clear the rear axle... just cut it and re-weild to the stock piping.. its the same size inlet and should line right up.

-Jason

97 Talon ESi-T (forever in progress...)


95 GS (Gone)
16.74@83.18mph
119.8 whp - 113.3 lbs/ft


2GNT #677
My Wiki Page: www.2gnt.com/index.php?d=Iamnotwhoiam
Pictures: http://picasaweb.google.com/iamnotwhoiam/Talon/

yeah it bolts up no prob...just make sure u weld the stock pipe back up to it right or the flange won't match up. and use a gasket so there are no leaks.

mark

stage 2 turbo and all that crap

Thanks guys. I figured I could make something work, but I just wanted to make sure. I appreciate the input.

AEM CAI/ AFX UDP/ GST Muffler/ Magnecors/ NGK plugs/ Intrax Springs/ Symbroski Shift Kit

I have a 97 GSX muffler welded on for $50

AFX/UDP,AEM,AF/X 55mm TB,50 shot of NOS,Glenn's short shifter,17" tantrum,prokit KYB AGX,JL stealthbox sony headunit,audiobahn amp,M3 style mirrors,Blue leds,yellow fogs,reverse ind,w