I know that there is a bend in the gsx piping at the rear axle that will not allow us to use it. I was wondering, though, is the piping the same size? If it is then we could just weld on the muffler, correct?

i wud think so, if not, any muff shop can use an adapter to fix it...
wait til sumone who knows replies tho...

good luck

well i know for sure stock to stock it will not fit. i got the greddy power extreme made for an X and i had a muff shop install it. it has 3 inch piping and they fit it onto my stock piping. so i dont see y they couldnt for you. you should have no prob having a muff shop install that. l8r


"Proud to be, a 2gnt"


-mitsuman

Turbo:
1. HRC STG 2
2. Blits SS BOV
3. HKS Turbo timer

Exhaust:
1. Greddy Power Extreme

Ride:
1. Motegi MR7 17'' wrapped
in yokohama A550v
235/45/17

Sound:
1. sony xplod cdxm620 deck
2. 2 10'' audiobahn subs
3. nice shiny audiobahn
amp

In room:
1. blitz front end(thnx 2
eclipse804)
2. H&R sport springs(thnx 2
eclipse804)

Fun mods:
1. "Nozzel mod"

Wanted:
1. to much ish to list

its the exact same muffler that is on the gs-t its just the piping has different bends to clear the rear axle... just cut it and re-weild to the stock piping.. its the same size inlet and should line right up.

yeah it bolts up no prob...just make sure u weld the stock pipe back up to it right or the flange won't match up. and use a gasket so there are no leaks.

mark

Thanks guys. I figured I could make something work, but I just wanted to make sure. I appreciate the input.

I have a 97 GSX muffler welded on for $50