is the afx underdrive pulley from howell automotive a good one? thanks

1997 Mitsubishi Eclipse GSX: K&N Filter, John Sheppard built transmission with GVR4 1st gear, autometer boost gauge, "free mods", Greddy type-s BOV, broken shifter

yes, that is what most people have I belive, thats what I have only because somebody told me it was good

>is the afx underdrive pulley from howell automotive a good
>one? thanks

Heck yeah! We believe it to be the best on the market. It is light weight, has 30% underdrive and yields 8 to 11 hp gains. It also has a stainless steel center bushing to prevent crankshaft galling.

Gary

Visit the Howell Automotive Open House August 20th, 2005. The largest gathering of Chrysler 2.0 engines on the planet.

US Small Business Administration Export Business of the Year for 2003

Visit Howell Automotive at www.howellautomotive.com

I am looking to buy a UDP in the near future, and was just wondering how hard are they to install?

AEM CAI/ AFX UDP/ GST Muffler/ Magnecors/ NGK plugs/ Intrax Springs/ Symbroski Shift Kit

I would highly recommend doing it somewhere where you have access to a good air ratchet. It makes life so much easier for this one. Otherwise you have to come up with some way of holding the pulley so it doesn't turn. Both on and off. You also need some SERIOUS heat to get the new one on. I used a map gas torch which is much hotter than propane and it was still tough.

go to vegasdsmr's web page, there is a link in his sig. Gives you a step by step as to how to install the thing. I used it and had success installing mine. BTW set aside a few hours to get this done!!

you guys and your damned pressed on crank pulley's.. hehe. I put a UDP on my zx2 just a few weeks ago.. only took an hour (half of which was routing the new belt). didn't need a '5-ton puller' or anything, just a TQ wrench, some extensions, and someone to hit the brakes.

fak off breezio, just playin. ya, check my site, and howell/afx is the udp to get...

03 srt-4 13.130@112.47mph (n2o, stock turbo, 10/2003)
now: 20g, portfueler, bpu+++ (track/dyno times tbd...)

i farted on your wiki

Everyone is saying afx. I have seen a couple people with unorthodox. Is there a difference in performance?

AEM CAI/ AFX UDP/ GST Muffler/ Magnecors/ NGK plugs/ Intrax Springs/ Symbroski Shift Kit

just wanted to know if the info on the 2gnt site about not being able to pass smog with a udp on is true. thanks



'96 Eclipse RS
Clear corners, custom airbox

Smiley face 4 life!

Jaeson
'96 Eclipse RS

umm, udp has nada to do w/smog...
afx udp =30% underdrive at 8-12 hp gain
unorthodox=20% underdrive which would ~~~result in a 5-8hp gain

u do the math...

03 srt-4 13.130@112.47mph (n2o, stock turbo, 10/2003)
now: 20g, portfueler, bpu+++ (track/dyno times tbd...)

i farted on your wiki

besides the fact that the unorthadox usually goes for around 200 bux, the af/x will give you more hp and you can get it for 150 bucks. Or someone had one for sale for 140 bucks, one_cool_guy i think it was.

When you install an UDP are you suppose to use a shorter than stock belt?

Brynden

They come with shorter than stock belts.

________________________________________________________________________________________
current status - No 3rd Gear synchro


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

ya its worth it... make sure its the right one

Boca Raton, Florida
95 Eclipse GS- sold
99 Eclipse GSX- 386awhp
98 Eclipse GS- sold
92 Prelude

All of this has been covered before. Try looking before you post next time.

_________________________________________
I'm the guy that bans you for breaking the rules. I am the troll killer. I am the law here.

I hope that you are kidding about the searching crap. I would, but the search functions sucks balls.

Anyways, the REASON I was asking is because I think the "performance shop" that changed all my belts for me put the stock size on and that is why I am throwing belts. But I was not sure, so I thought I would ASK. After all this is an "open forum" right? I sure hope so.

Brynden

They can't have put stock belts on there no way to even tension them close enough to even turn an accessory.

To whomever used a torch on the pulley NOOOOOO heating an al;uminum pulley is a very bad idea you can warp the pulley. not a problem on a cast iron pulley but do not do it to an aluminum pulley.

Una salus victus.
It's not about being invincible, it's about being ready; for anything.



Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: Ported/Polished Intake Manifold 1/2, Rear disc brake conversion kit w/, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

why