I need to know if they make any of the following aftermarket parts- Stainless steel valves,Big brake upgrade, Fuel rails,TB -not stock bored,copper head gasket,oil cooler,Clutches, and rotors.
And ohhhh yeea.....will a honda oil cap fit a 420a?

Optima deep cycle battery
Integra projectors
NGKs
Bosch wires -:x
painted calipers
polished engine stuff~
GReddy headers-custom flanges
Monza catback_trying to get a different muffler

1998 Integra Type R #0072

Do a search of the proper forums. All of this has been answered before.

Greg

'19 Genesis G70 3.3t AWD
'88 Chrysler Conquest TSI

Pretty much, yes.

Check out the howell automotive banner up above. (Hit reload if its a 2gnt banner)

------------------------------------------------
98 ESi
95 GS

Stainless steel valves,

This has been talked about 2 TIMES in the last week, just look back a little.

Big brake upgrade,

Discussed MANY times. There are a LOT of posts about using the AWD 2 piston brakes and there is also a Wildwood 4 piston upgrade and the AEM 4 piston setup available.


Fuel
>rails,

Our stock rail is good for at LEAST 400 HP, how much are YOU making?



TB -not stock bored,

The only way would be something customized which means $$$


copper head gasket,

Too many people have complained about leaking with copper head gaskets and the stock MLS gasket is perfect, just get ARP studs or tighten the Stock bolts 7 ft/lbs higher than the stock recommendations and this will help to seal the stock gasket for high boost, high compression or nitrous use.


oil
>cooler,


Hades Omega posted some nice pics of his like 2 weeks ago.


Clutches,

Clutchmasters or the HRC clutches ( same thing) are the way to go.


and rotors.

More searching and you will have LOTS of info.


>And ohhhh yeea.....will a honda oil cap fit a 420a?
>

YUP

>Optima deep cycle battery
>Integra projectors
>NGKs
>Bosch wires -:x
>painted calipers
>polished engine stuff~
>GReddy headers-custom flanges
>Monza catback_trying to get a different muffler


SEARCH. . . . .


________________________________________________________________________________________
current status - No 3rd Gear synchro


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

Nice to meet you, Caption Oblivious.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

>And ohhhh yeea.....will a honda oil cap fit a 420a?
>

YUP

Has anyone tried this? I've heard It doesn't work. If that works than do any other caps/plugs work? Like trans plug, Oil pan plug, and coolent cap work on our motors too?

A.D.P.
"...If you do too much, people become dependant. If you do to little, people loose hope. If you do it right, people won't be sure you've done anything at all."
bring it on............

A.D.P.
"...If you do too much, people become dependant. If you do to little, people loose hope. If you do it right, people won't be sure you've done anything at all."
bring it on...........

I work in Sales and R&D for Cool-Tek, a division of Perma industries inc. I am one kit away from having our Sport compact program complete.
www.perma-cool.com/cool-tek I need to find a 1995-1999 Eclipse non-turbo vehicle to prototype an engine oil cooler. If your in the socal area let me know. wesf@perma-cool.com