| Go back to previous topic | | Forum name | Performance/Engine | | Topic subject | DOES ANYONE MAKE ANY OF THESE PARTS? | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=18273 |
18273, DOES ANYONE MAKE ANY OF THESE PARTS?
Posted by BLACKWIDOWDSM, Mar-24-02 05:49 AM
I need to know if they make any of the following aftermarket parts- Stainless steel valves,Big brake upgrade, Fuel rails,TB -not stock bored,copper head gasket,oil cooler,Clutches, and rotors.
And ohhhh yeea.....will a honda oil cap fit a 420a?
Optima deep cycle battery
Integra projectors
NGKs
Bosch wires -:x
painted calipers
polished engine stuff~
GReddy headers-custom flanges
Monza catback_trying to get a different muffler
|
18274, RE: DOES ANYONE MAKE ANY OF THESE PARTS?
Posted by 992gnt, Mar-24-02 07:38 AM
Do a search of the proper forums. All of this has been answered before.
|
18275, RE: DOES ANYONE MAKE ANY OF THESE PARTS?
Posted by EvuLFleA, Mar-24-02 09:37 AM
Pretty much, yes.
Check out the howell automotive banner up above. (Hit reload if its a 2gnt banner)
|
18276, RE: DOES ANYONE MAKE ANY OF THESE PARTS?
Posted by Fast420A, Mar-24-02 11:03 AM
Stainless steel valves,
This has been talked about 2 TIMES in the last week, just look back a little.
Big brake upgrade,
Discussed MANY times. There are a LOT of posts about using the AWD 2 piston brakes and there is also a Wildwood 4 piston upgrade and the AEM 4 piston setup available.
Fuel
>rails,
Our stock rail is good for at LEAST 400 HP, how much are YOU making?
TB -not stock bored,
The only way would be something customized which means $$$
copper head gasket,
Too many people have complained about leaking with copper head gaskets and the stock MLS gasket is perfect, just get ARP studs or tighten the Stock bolts 7 ft/lbs higher than the stock recommendations and this will help to seal the stock gasket for high boost, high compression or nitrous use.
oil
>cooler,
Hades Omega posted some nice pics of his like 2 weeks ago.
Clutches,
Clutchmasters or the HRC clutches ( same thing) are the way to go.
and rotors.
More searching and you will have LOTS of info.
>And ohhhh yeea.....will a honda oil cap fit a 420a?
>
YUP
>Optima deep cycle battery
>Integra projectors
>NGKs
>Bosch wires -:x
>painted calipers
>polished engine stuff~
>GReddy headers-custom flanges
>Monza catback_trying to get a different muffler
SEARCH. . . . .
________________________________________________________________________________________
current status - No 3rd Gear synchro
http://hometown.aol.com/ohshootuhh/
www.Fast420A.com
|
18277, RE: DOES ANYONE MAKE ANY OF THESE PARTS?
Posted by DarkOne, Mar-24-02 01:32 PM
Nice to meet you, Caption Oblivious.
:-)
|
18278, RE: DOES ANYONE MAKE ANY OF THESE PARTS?
Posted by babybeclipse, Mar-25-02 12:55 AM
>And ohhhh yeea.....will a honda oil cap fit a 420a?
>
YUP
Has anyone tried this? I've heard It doesn't work. If that works than do any other caps/plugs work? Like trans plug, Oil pan plug, and coolent cap work on our motors too?
|
18279, SEARCH!!!!!!!!
Posted by Avenger EST, Mar-24-02 11:04 PM
A.D.P.
"...If you do too much, people become dependant. If you do to little, people loose hope. If you do it right, people won't be sure you've done anything at all."
bring it on............
|
18280, RE: DOES ANYONE MAKE ANY OF THESE PARTS?
Posted by wes1, Apr-05-02 09:11 AM
I work in Sales and R&D for Cool-Tek, a division of Perma industries inc. I am one kit away from having our Sport compact program complete.
www.perma-cool.com/cool-tek I need to find a 1995-1999 Eclipse non-turbo vehicle to prototype an engine oil cooler. If your in the socal area let me know. wesf@perma-cool.com
| |