I'm gonna change mine because its been leaking around the spark plugs, i have searched and found that you need the main gasket and 4 plug well gaskets. now i'm just wondering if there is anything hard about it. or if its easy. also does anybody know what the torque specs are for all the bolts? thanks guys.
-Josh




weapon-r intake
greddy headers
apex-i n1 catback
afx udp
energy suspension
motor mounts
cf altezza tail lights
bored t/b
magnecore wires
hotter plugs

15.882@86.27

corbin has a pimp write up.

the only "special" special tool u need is a 8mm deep socket. i dunno his site off hand, but i think its linkd on the main page.

good luck

03 srt-4 13.130@112.47mph (n2o, stock turbo, 10/2003)
now: 20g, portfueler, bpu+++ (track/dyno times tbd...)

i farted on your wiki

www.geocitites.com/vttalon/ is Corbin's site.



________________________________________________________________________________________
current status - No 3rd Gear synchro


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

get some blur rtv silicone too

put some in each corner and on the cam sensor seal

just unbolt the coil pack
and then unbolt the vc.. 8mm deep socket you will need

clean it up really good and put the new gasket and spark plug gaskets in

tq specs on VC is 1-3lbs

I love dino and 2gnt. ####ers (my word) bliz stole it but i let him borrow it