#137851, "RE: Will these injectors fit?" In response to Reply # 0
I have no clue why your injectors didn't fit the first time. I pulled some 550s out of my 1g when I had it and put them in the RS, fit snuggly with new o rings.
#137852, "RE: Will these injectors fit?" In response to Reply # 1
Originally posted by Slo2g I have no clue why your injectors didn't fit the first time. I pulled some 550s out of my 1g when I had it and put them in the RS, fit snuggly with new o rings.
Me either! I bought them thinking they would! Unless I am missing something but they are extremely loose on the rail and have no way of clipping to it and there is no way they're fitting in the block... Unless I took a hammer out.
#137853, "RE: Will these injectors fit?" In response to Reply # 2 Apr-23-13 04:24 AM by bullettdsm
Originally posted by RfOeCnKdOeNr
Originally posted by Slo2g I have no clue why your injectors didn't fit the first time. I pulled some 550s out of my 1g when I had it and put them in the RS, fit snuggly with new o rings.
Me either! I bought them thinking they would! Unless I am missing something but they are extremely loose on the rail and have no way of clipping to it and there is no way they're fitting in the block... Unless I took a hammer out.
You're trying to put them in upside down, lol.
Obviously your friend sold you the wrong injectors (btw the injectors fit into the intake not the block).
Captain Caveman
96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq 97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq 98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats 99 OZ 5sp Stocker 15.856 @ 85.97 99 GS stocker auto 17.7@77mph!
#137854, "RE: Will these injectors fit?" In response to Reply # 3
Originally posted by bullettdsm
Originally posted by RfOeCnKdOeNr
Originally posted by Slo2g I have no clue why your injectors didn't fit the first time. I pulled some 550s out of my 1g when I had it and put them in the RS, fit snuggly with new o rings.
Me either! I bought them thinking they would! Unless I am missing something but they are extremely loose on the rail and have no way of clipping to it and there is no way they're fitting in the block... Unless I took a hammer out.
You're trying to put them in upside down, lol. Obviously your friend sold you the wrong injectors (btw the injectors fit into the intake not the block).
Haha... The old upside down injector trick?? Oops, I meant intake.
#137856, "RE: Will these injectors fit?" In response to Reply # 5
Originally posted by SilvrEclips Are you using 420a injector orings?
I was using whatever o-rings you see in the picture. The 420A intake o-rings don't work on the intake side because there is no recessed lip for them. And I tried the 420A ones on the rail side and the injector was still way too small for the rail.
#137857, "RE: Will these injectors fit?" In response to Reply # 4 Apr-24-13 11:40 AM by DarkOne
Originally posted by RfOeCnKdOeNr The 420A intake o-rings don't work on the intake side because there is no recessed lip for them
Because those injectors are completely missing the pintle caps and the o-rings look way too small. They're incomplete.
Originally posted by RfOeCnKdOeNr Anyways, can anyone shed some light on the ones I link originally... Will they fit our fuel rail and intake?
Yeah, they'll fit, but I'm more curious about WTF injectors you have that don't fit. Can you take a pciture of the other side of the injector? there should be a part number on the other side in a pattern like X-XXX-XXX-XXX (if they're made by bosch) or a five- or six-digit alphanumeric part number if they're made by accel.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#137859, "RE: Will these injectors fit?" In response to Reply # 7
Originally posted by DarkOne
Originally posted by RfOeCnKdOeNr The 420A intake o-rings don't work on the intake side because there is no recessed lip for them
Because those injectors are completely missing the pintle caps and the o-rings look way too small. They're incomplete.
Originally posted by RfOeCnKdOeNr Anyways, can anyone shed some light on the ones I link originally... Will they fit our fuel rail and intake?
Yeah, they'll fit, but I'm more curious about WTF injectors you have that don't fit. Can you take a pciture of the other side of the injector? there should be a part number on the other side in a pattern like X-XXX-XXX-XXX (if they're made by bosch) or a five- or six-digit alphanumeric part number if they're made by accel.
They are Lucas/RC 550CC injectors... The only part number I can read from my pictures is D1151BA.
They are at my parents house so next time I go home I will look for more numbers.
#137860, "RE: Will these injectors fit?" In response to Reply # 8
Those *should* be Lucas low impedance 550cc/min injectors. Use standard 2GNT o-rings instead of the DSM o-rings and replace the pintle caps and they should fit.
They're low impedance, so you'll want either a resistor pack or something to drive them other than the stock ECU.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#137861, "RE: Will these injectors fit?" In response to Reply # 9
Originally posted by DarkOne Those *should* be Lucas low impedance 550cc/min injectors. Use standard 2GNT o-rings instead of the DSM o-rings and replace the pintle caps and they should fit. They're low impedance, so you'll want either a resistor pack or something to drive them other than the stock ECU. You can buy injector parts kits from http://www.mrinjectorparts.com/top-feed-kits.html Check the Lucas stuff towards the bottom.
Sweet! Thanks for the link!
I am going to be running them with MS2 so I shouldn't need the resistor pack... Right? That's what I got from reading MSExtra...
#137862, "RE: Will these injectors fit?" In response to Reply # 10
Originally posted by RfOeCnKdOeNr I am going to be running them with MS2 so I shouldn't need the resistor pack... Right? That's what I got from reading MSExtra...
MS2 can drive low impedance just fine.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#137863, "RE: Will these injectors fit?" In response to Reply # 11
Originally posted by DarkOne
Originally posted by RfOeCnKdOeNr I am going to be running them with MS2 so I shouldn't need the resistor pack... Right? That's what I got from reading MSExtra...
Search
Printer-friendly copy
2 Users in Chat
/
