well, I finally got enough time to put in the mopar windage tray for the neon on my motor.....and gues what.......it doesn't clar the oil pan!!!!It woudl hav eto be shaved down a little on the back edge to clear the pan, but seeing as I was already frustrated, and I "really' didnt' want to give up my bedplate studs anyway, i opted to remove it. I will be returning this part this week .

A.D.P.
bring it on............

A.D.P.
"...If you do too much, people become dependant. If you do to little, people loose hope. If you do it right, people won't be sure you've done anything at all."
bring it on...........

Thanks for letting us know about your discoveries. Where do you get these parts from where you can install them and still return it?

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

I thought a few people were using it from this board...?

------------------------------------------------
98 ESi
95 GS

ehh, a windage tray probably wouldn't have done much anyway

I'm sure you've got plenty more tricks up your sleeve to get more power!

"Tutto fa brodo."

Todd Scungio
98 RS
15.173 @ 90.70 MPH

And also a 2011 Ralliart

yeah, it probably wouldn't. the crank shouldn't create that much resistance with the oil to worry about anyway.

A.D.P.
bring it on............

A.D.P.
"...If you do too much, people become dependant. If you do to little, people loose hope. If you do it right, people won't be sure you've done anything at all."
bring it on...........

Armond, I think Gary Howell had already told us (the 2gnt.com board) about clearance issues as a reason the Moroso oil pan would not fit a long time ago when that product first debuted. I'm not surprised the same issues apply to the neon windage tray.

Sorry you had to find out the expen$ive way!

_____________________________________
Jason ESi-T

04' BMW 325Ci
91' Nissan 240SX
98' Eagle Talon ESi (sold)

I knew the morosso oil pan wouldnt' fit the first time I saw it (it isnt' grovved fo rthecenter member or the downpipe). I didnt' know that teh windage tray wouldnt' fit. it doesn't bolt in the pan, so there was a chance that it could fit. like I said, it BARELY doesn't clear the rear of the pan (left/intake side of engine), but I don't feel like modifying it to fit. I don't think it is worth it.

A.D.P.
bring it on............

A.D.P.
"...If you do too much, people become dependant. If you do to little, people loose hope. If you do it right, people won't be sure you've done anything at all."
bring it on...........

I would see this as a modification more worth it to you autocrossers. As you whip from side to side the oil sloshed around and can keep the oil away from the crank. If it fit it would have been nice.

"The fastest draw is when the sword never leaves the scabbard,
The strongest way to block, is never to provoke a blow,
And the cleanest cut is the one withheld."



Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

To Be Installed: Ported/Polished Intake Manifold 1/2, Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads, Crane Ignition Amp

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.