Welcome to the 2GNT Forum!
Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers
Search Printer-friendly copy 3 Users in Chat
Top 2GNT Technical Performance/Engine topic #134284
View in linear mode

Subject: "fyi for 2.4 guys needing pan" Previous topic | Next topic
DstachJun-03-11 12:00 PM
Member since Dec 04th 2010
276 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#134284, "fyi for 2.4 guys needing pan"


          

I was at the junk yard the other day looking for an srt4. I couldn't find one. I did find a pt cruise and the oil pans are the same. (oil filter on back side) They do not have the cooler but you can use the srt4 oil pump with it. Just thought I'd tell you guys before buying $100 pans. Mine was $21

To sum it up. Pt cruiser oil pan (with oil filter on back) will bolt up to edz block when used with str4 oil pump.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic
RE: fyi for 2.4 guys needing pan, Global Ruler Of All ThingsDarkOne, Jun-03-11 12:03 PM, #1
RE: fyi for 2.4 guys needing pan, AdministratorCODE4, Jun-03-11 12:39 PM, #2
RE: fyi for 2.4 guys needing pan, 2ndGen-ElTalon, Jun-03-11 01:45 PM, #3
RE: fyi for 2.4 guys needing pan, Dstach, Jun-03-11 08:30 PM, #4
      RE: fyi for 2.4 guys needing pan, Global Ruler Of All ThingsDarkOne, Jun-04-11 12:00 AM, #5
           RE: fyi for 2.4 guys needing pan, PsychO, Jun-04-11 04:28 PM, #6
           RE: fyi for 2.4 guys needing pan, Dstach, Jun-05-11 06:38 AM, #7
                RE: fyi for 2.4 guys needing pan, Global Ruler Of All ThingsDarkOne, Jun-06-11 08:19 AM, #8
                     RE: fyi for 2.4 guys needing pan, DirtMegirt, Jun-07-11 04:16 PM, #9
                          RE: fyi for 2.4 guys needing pan, Dstach, Jun-07-11 07:59 PM, #10
                               RE: fyi for 2.4 guys needing pan, Global Ruler Of All ThingsDarkOne, Jun-08-11 07:26 AM, #11
                                    RE: fyi for 2.4 guys needing pan, Dstach, Jun-08-11 07:57 AM, #12

Global Ruler Of All ThingsDarkOneJun-03-11 12:03 PM
Donating 2GNT member
14955 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#134285, "RE: fyi for 2.4 guys needing pan"
In response to Reply # 0




          

Originally posted by Dstach
I was at the junk yard the other day looking for an srt4. I couldn't find one. I did find a pt cruise and the oil pans are the same. (oil filter on back side) They do not have the cooler but you can use the srt4 oil pump with it. Just thought I'd tell you guys before buying $100 pans. Mine was $21 To sum it up. Pt cruiser oil pan (with oil filter on back) will bolt up to edz block when used with str4 oil pump.


It's mostly the same block, same oil pump casting, same pan. That's pretty common knowledge. You can't use the cooler anyway, and I'm not sure anyone is using the stock oil filter elbow on the back of the pan...

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
AdministratorCODE4Jun-03-11 12:39 PM
Member since Nov 23rd 2003
2552 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#134286, "RE: fyi for 2.4 guys needing pan"
In response to Reply # 1




          

Originally posted by DarkOneI'm not sure anyone is using the stock oil filter elbow on the back of the pan...


I am emoji

But only because I run an unmodified SRT pan. Cutting the pan for downpipe provisions requires alternative oil filter considerations.

---

2012 2500HD LML


  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

        
2ndGen-ElTalonJun-03-11 01:45 PM
Member since May 26th 2010
88 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#134288, "RE: fyi for 2.4 guys needing pan"
In response to Reply # 2


          

So how did you get around it Dave? Just a few bends & turns in your DP? Or did you mess with the Crossmember?

Originally posted by 740TurboBrick

"Dsms run on Gasoline, DSMers run on Alcohol...Id bring a tank to refuel the DSMers..."

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
DstachJun-03-11 08:30 PM
Member since Dec 04th 2010
276 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#134296, "RE: fyi for 2.4 guys needing pan"
In response to Reply # 1


          

If you can put a edz oil pan on the srt4 oil put the I'm impressed. The edz had oil filter casted to the oil pump. Srt4 does not.

And Dave just saw the vid of your car. That is one mean sounding eclipse!!

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

        
Global Ruler Of All ThingsDarkOneJun-04-11 12:00 AM
Donating 2GNT member
14955 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#134297, "RE: fyi for 2.4 guys needing pan"
In response to Reply # 4




          

Originally posted by Dstach
If you can put a edz oil pan on the srt4 oil put the I'm impressed.


it *is* the same flange, so yeah, technically the pan would bolt up... but that isn't what i said in the first place.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

            
PsychOJun-04-11 04:28 PM
Member since Jun 10th 2004
166 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#134298, "RE: fyi for 2.4 guys needing pan"
In response to Reply # 5


          

Here is mine.







I'm using an adaptor plate that connects to the where the OFH would go. The filter will be relocated in front of the passenger wheel behind the bumper.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

            
DstachJun-05-11 06:38 AM
Member since Dec 04th 2010
276 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#134301, "RE: fyi for 2.4 guys needing pan"
In response to Reply # 5


          

Its not the same flange. The oil pump side is much different. The rest is identical but the side the oil pump goes to in much different.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                
Global Ruler Of All ThingsDarkOneJun-06-11 08:19 AM
Donating 2GNT member
14955 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#134305, "RE: fyi for 2.4 guys needing pan"
In response to Reply # 7




          

Originally posted by Dstach
Its not the same flange. The oil pump side is much different. The rest is identical but the side the oil pump goes to in much different.


The only difference I am aware of is that the PT / SRT4 cast pans have oil passages machined through them, and a slightly wider area of the flange where they enter the pan. Otherwise, it's the same flange and bolt pattern. You could probably modify a stamped EDZ pan to bolt up if you plan to use a remote oil filter.

It doesn't matter, because that's still not what I said in the first place.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                    
DirtMegirtJun-07-11 04:16 PM
Old School 2GNTer
205 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#134312, "RE: fyi for 2.4 guys needing pan"
In response to Reply # 8




          

Originally posted by DarkOne
You could probably modify a stamped EDZ pan to bolt up if you plan to use a remote oil filter.


That's exactly what I wanted to do. Unfortunately, as you can see in the pic below, i would've had to cut into the flange as well as the sidewall of the pan to gain access to both filter passages. I have since decided to just go with the SRT pan.

DirtMegirt
Wiki Contributor

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                        
DstachJun-07-11 07:59 PM
Member since Dec 04th 2010
276 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#134313, "RE: fyi for 2.4 guys needing pan"
In response to Reply # 9


          

Thank you for the pic. thats what I was talking about. I posted because the pt pan is identical to srt4 just less cost and junkyards have them

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                            
Global Ruler Of All ThingsDarkOneJun-08-11 07:26 AM
Donating 2GNT member
14955 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#134317, "RE: fyi for 2.4 guys needing pan"
In response to Reply # 10




          

Originally posted by Dstach
Thank you for the pic. thats what I was talking about. I posted because the pt pan is identical to srt4 just less cost and junkyards have them


It's good info. Grab the PT side MM bracket/PS pump mount bracket, too... it's handy.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                                
DstachJun-08-11 07:57 AM
Member since Dec 04th 2010
276 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#134319, "RE: fyi for 2.4 guys needing pan"
In response to Reply # 11


          

Almost forget. Thanks for the reminder

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Top 2GNT Technical Performance/Engine topic #134284 Previous topic | Next topic
Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com
Generated in 0.063 seconds, executing 38 queries.