I took my block, head etc to the engine shop today for machining.

Im getting a valve job, bore .020 and hone, crank redone, engine balanced, hot tank dipped, and getting the head pressure tested.

My rightside cam has one lobe that has worn through the hardened coating and also slightly damaged the rocker.

The engine guy told me the cam was junk, so Im going to get new rockers($$) and I also need two new cams.

As far as I know they dont make good aftermarket cams yet, so i am going to buy factory cams.

The only place I found them was at carparts.com, but they only listed them for 90-94 4g63(wrong motor) at $192 a piece and the rockers are $14 a piece


Where can i get new cams and rockers for a good price?

Sorry about the long post

Thanks guys

Derek

JE Pistons .020 over
Eagle Rods
TotalSeal Gapless Rings
HRC Stage 2 Kit
Stage 4 Clutchmasters
Phantom grip LSD
TurboXS Hp boost controller
TurboXS Type H BOV
Greddy Turbo Timer
OBX 2.5" catback
2.5" Racecat
RRE Oil Catchcan w\o PCV
Top Fuel UDP
PT Cruiser Lifters and Rockers
Missing Link
MSD Coil pack
MSD 8.5mm wires
AFX Solid Front mount
Tokico Illuminas
Tokico Springs
Brembo Rotors
Ceramic pads
17" Black ADR Dv-8 Rims
Clear Corners
Aluminum Gauge bezel(15+HP!!!)
White Face Gauges

Soon to come..
Black projector headlights
Front 97 Eclipse conversion
All GO, A little SHOW.....The way it should be

www.howellautomotive.com has both. cams are really exspensive and from what i've read they dont fit properly. but you can just get thew new PT cruiser rocker arms, far better quality then ours.

Original 15 of 2gnt.com

i think hrc has crane cam's, but i don't know what the price is for em, or how good they are

*this one's for drbalazo7* Damn skeeters!!!

1999 Eclipse Anniversiary Ed GS

Factory:
Turbo wing
OZ rims
Leather

Aftermarket:
Pacesetter Cat-

well i was reading a mag yesterday and there was a crane add.. and it said 4g63 and 420a cams.. like 429 i think..

so they might be out

I love dino and 2gnt. ####ers (my word) bliz stole it but i let him borrow it

i have aem cam gears if you interested BRAND NEW In RED AEM

please email me at flossinpnoyracer@aol.com

1999 GST

1997 RS

as far as i know no one makes performance cams for our cars yet, but if you check on asog.net in the forsale forum, someone listed that they talked a dealer into 15% over cost on any OEM parts for being in a chrysler/mitsu club. the cam for the 4cyl avenger is the same as the eclipse

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

Camshafts:

http://cgi.ebay.com/ebaymotors/aw-cgi/ebayISAPI.dll?ViewItem&item=601126618&r=0&t=0

or for actual cam gears:


http://cgi.ebay.com/ebaymotors/aw-cgi/ebayISAPI.dll?ViewItem&item=601126681&r=0&t=0

_____________________________________
Jason ESi-T

04' BMW 325Ci
91' Nissan 240SX
98' Eagle Talon ESi (sold)

Yeah no one has perf cams out for us yet.

Crane has been "fixing" their neon cams to drop in our for probably cloose to a year now. The only way you can get these to fit is to index them yourself.

Crower should have cams out for us in a few month(crossing my fingers)

"The fastest draw is when the sword never leaves the scabbard,
The strongest way to block, is never to provoke a blow,
And the cleanest cut is the one withheld."

Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All Motor Beast in the Making

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

To Be Installed: Ported/Polished Intake Manifold, Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

Jason Esi-T, you are a life saver. Thats everything I need. Hes gonna get back to me with the condition, but I assume they are good because I had my head apart at that time and mine were good.

Thanks, you saved me almost $400

Later

JE Pistons .020 over
Eagle Rods
TotalSeal Gapless Rings
HRC Stage 2 Kit
Stage 4 Clutchmasters
Phantom grip LSD
TurboXS Hp boost controller
TurboXS Type H BOV
Greddy Turbo Timer
OBX 2.5" catback
2.5" Racecat
RRE Oil Catchcan w\o PCV
Top Fuel UDP
PT Cruiser Lifters and Rockers
Missing Link
MSD Coil pack
MSD 8.5mm wires
AFX Solid Front mount
Tokico Illuminas
Tokico Springs
Brembo Rotors
Ceramic pads
17" Black ADR Dv-8 Rims
Clear Corners
Aluminum Gauge bezel(15+HP!!!)
White Face Gauges

Soon to come..
Black projector headlights
Front 97 Eclipse conversion
All GO, A little SHOW.....The way it should be

I just happened to see them today on ebay and wasn't really thinking anything of it until I saw your post. I'm just happy they're what you needed.

Good luck with your rebuild and keep us all updated! (I'm jealous!)

_____________________________________
Jason ESi-T

04' BMW 325Ci
91' Nissan 240SX
98' Eagle Talon ESi (sold)

Score one for Jason!

Sux to see all the yunguns getting all the nice parts, doesn't it? hehe (you've got the money for R&D!)

SCORE!

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

I can sell you my old stock cams and lifters and stuff out of my 97. they have about 38000 miles on them, but they aren't worn out or anything. send me an e-mail and make an offer. gte201j@prism.gatech.edu

A.D.P.
bring it on............

A.D.P.
"...If you do too much, people become dependant. If you do to little, people loose hope. If you do it right, people won't be sure you've done anything at all."
bring it on...........