While pulling my motor out a few weeks ago I neglected to take the UDP off and damaged it quite a bit in the process. I chipped quite a few sections of the border for the belt (what keeps it on track). While taking it down the freeway at normal speeds it completely obliterated the PS belt. Im just going to throw it in the scrap pile and put the stock one back on. Considering I now have the cams, how much top end could I really lose? It wasnt a huge gain in the first place. Just a bit freer revving. Ill probably get another one when the funds allow.
95 Eclipse GS: 10.5:1, Crower 2's and MSII 186 WHP - 150 WTQ 14.697 @ 93.85 MPH......Gone, but not forgotten 99 420A Avenger: Given to my sister 99 GS OZ: Sold 03 Evo 8: Family Car with balls
#126918, "RE: UDP is junk now..." In response to Reply # 0
that sucks, Oh well.
Erik P. Official 2GNT thread Hijacker Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be... All we know is, He's not The Stig... But he is The Stig's Spartan cousin!
#126919, "RE: UDP is junk now..." In response to Reply # 1
You put the puller on wrong, didn't you?
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#126925, "RE: UDP is junk now..." In response to Reply # 2
No, I just made the mistake of leaving it on while pulling the motor. Ive done it before, although its not the best idea. I had some problems getting it out, and by the time it was out it was pretty much destroyed. Puller worked great though..
95 Eclipse GS: 10.5:1, Crower 2's and MSII 186 WHP - 150 WTQ 14.697 @ 93.85 MPH......Gone, but not forgotten 99 420A Avenger: Given to my sister 99 GS OZ: Sold 03 Evo 8: Family Car with balls
Most of those are for 4G63 engines. Besides they're ALL cheap chinese knockoffs.
Erik P. Official 2GNT thread Hijacker Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be... All we know is, He's not The Stig... But he is The Stig's Spartan cousin!
Most of those are for 4G63 engines. Besides they're ALL cheap chinese knockoffs.
That is why I posted the link. Was not sure what platform the OP was speaking on, and both are covered in the link. As far as the price is concerned, maybe you are ok with spending more money when it is not necessary. The differences in udp's (not to mention the cars they are used on + driver characteristics) is not worth mentioning. Bought my tti pulley last year for $100 shipped, which was not what it retailed for. Had that deal not surfaced, it would be ebay all day. We are talking about a solid piece of aluminum, not the jack-in-the-box failure the obx lsd appears to be.
#126990, "RE: UDP is junk now..." In response to Reply # 7
I strongly disagree. Non-engine parts....intakes, exhaust, lights, ect sure,you can go a little cheap and go the ebay route, if it breaks, it does no real harm. But something like the UDP, if you go cheap and it fails, then what?! You're fucked.
Personally, I'd rather spend the extra $100 to ensure a good quality part and piece of mind.
#126992, "RE: UDP is junk now..." In response to Reply # 8
Well, honestly, the one I had on my car was one of the no name $30 shipped ones from Ebay. We tested it out, turns out it was nearly perfectly balanced out of the box. And I had no problems holding a belt on it until I fucked it up.
95 Eclipse GS: 10.5:1, Crower 2's and MSII 186 WHP - 150 WTQ 14.697 @ 93.85 MPH......Gone, but not forgotten 99 420A Avenger: Given to my sister 99 GS OZ: Sold 03 Evo 8: Family Car with balls
#126997, "RE: UDP is junk now..." In response to Reply # 8
Originally posted by irregular defect I strongly disagree. Non-engine parts....intakes, exhaust, lights, ect sure,you can go a little cheap and go the ebay route, if it breaks, it does no real harm. But something like the UDP, if you go cheap and it fails, then what?! You're fucked. Personally, I'd rather spend the extra $100 to ensure a good quality part and piece of mind.
I see your point of view. I found an ebay udp at the yard. Cost $5.00. It was a two piece and one of the bolts was stripped. Should have retapped it, but ended up getting a MP/x udp for $40.00. There is certainly nothing wrong with spending $100 for piece of mind. The AF/x was $180 when I got into cars, which I think is a bit much. Point is, the ebay unit is not a piece of crap, like some of the parts are. Like any two piece udp; thread the bolts in properly, and torque to spec. No worries.
Search
Printer-friendly copy
2 Users in Chat
