When I accelerate into second gear the car kind of shudders and when I let go of the gas and accelerate the car kind of shudders. Could that be the problem of bad front motor mount?
Does anyone have a picture of what their front mount looks like, so I can compare to my mount to see I do have a problem with my front mount. I don't have a camera to take a picture of my mount.
#125946, "RE: Front motor mount help" In response to Reply # 1
Originally posted by MITSUracer123 if u see any rips in it than its bad. or have some one hold the brake and press the gas as u watch the motor mount. you will see if its bad.
Please use real words, this isn't a Honda forum. u does not equal YOU here.
To the OP, like the previous post said, you'll need to look at the mount while someone else sits in the car and revs the engine while the car is in gear and the brake and E-brake are engaged. For the front mount reverse will work best as it will tilt the engine up and back giving you a great view of the mount and if there's any damage to it.
Erik P. Official 2GNT thread Hijacker Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be... All we know is, He's not The Stig... But he is The Stig's Spartan cousin!
#125948, "RE: Front motor mount help" In response to Reply # 2
I just took a look at the mount and it looks like it has a hairline crack on it. I was looking at the mount while the car was being reved up, and I noticed that the engine was raised kind of high does that mean anything?
#125950, "RE: Front motor mount help" In response to Reply # 3
it's probably toast. you can either buy a new mount or pull the old one and fill it with urethane.
Erik P. Official 2GNT thread Hijacker Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be... All we know is, He's not The Stig... But he is The Stig's Spartan cousin!
#125960, "RE: Front motor mount help" In response to Reply # 8
Originally posted by intimidator2003 Is it better to buy an oem front mount or would an aftermarket front mount be ok? If were to install the Prothane inserts for the front mount do I have to put the inserts in all the other?
question 1: whichever is fine. depends on if you want a vibrating ride or not. question 2: no
Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim
#125966, "RE: Front motor mount help" In response to Reply # 9
I was looking on the different the websites for an front oem mount, but I am having trouble finding the right mount. What I thought was the front mount may not be the front mount could anyone tell what is the name of the mount that is located by the radiator.
#125982, "RE: Front motor mount help" In response to Reply # 12
You can get a new front mount from Rock auto for around $14 + ship. They are usually very reasonable on shipping too. I had 5 new mounts shipped to me for $6.
The front mount is Anchor # 8670 and the rear mount is # 8798
I have the anchor mounts on my car and it's like driving a new car.
#125988, "RE: Front motor mount help" In response to Reply # 13
Originally posted by daes_venge You can get a new front mount from Rock auto for around $14 + ship. They are usually very reasonable on shipping too. I had 5 new mounts shipped to me for $6. The front mount is Anchor # 8670 and the rear mount is # 8798 I have the anchor mounts on my car and it's like driving a new car.
Thanks for the part# and review. I saw a few websites selling the Anchor brand but I was worried about the quality since it was cheap.
Search
Printer-friendly copy
0 Users in Chat
