i have a quick question, my ps/ac tensioner is almost off my car. It seems the smaller bolt that faces the intake is loose. Im not talking about the longer bolt that adjust the belt, but the bolt that holds the tensioner to its bracket. If you face your engine from the front, its the horizontal bolt. I cant remember if a nut held it on, can anyone tell me if thats all i need, or if i have to get a new tensioner. thanks in advance, i searched but just found post on problems not like mine.

99 Eclipse RS=real slow
dsm= developing smart mechanics since 1990
http://www.cardomain.com/ride/771313

Yes, there is supposed to be a nut there. Should be a 14mm nut, that you tighten down when you get the correct tension on the belt using the adjuster bolt.

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

thats what i thought, thanks again.

99 Eclipse RS=real slow
dsm= developing smart mechanics since 1990
http://www.cardomain.com/ride/771313

_

http://www.freeimagehosting.net/>