i have a quick question, my ps/ac tensioner is almost off my car. It seems the smaller bolt that faces the intake is loose. Im not talking about the longer bolt that adjust the belt, but the bolt that holds the tensioner to its bracket. If you face your engine from the front, its the horizontal bolt. I cant remember if a nut held it on, can anyone tell me if thats all i need, or if i have to get a new tensioner. thanks in advance, i searched but just found post on problems not like mine.

Yes, there is supposed to be a nut there. Should be a 14mm nut, that you tighten down when you get the correct tension on the belt using the adjuster bolt.

thats what i thought, thanks again.

_