Welcome to the 2GNT Forum!
Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers
Search Printer-friendly copy 1 User in Chat
Top 2GNT Technical Performance/Engine topic #122223
View in linear mode

Subject: "Got codes checked." Previous topic | Next topic
95Eclipse302Feb-20-06 01:31 PM
Member since Jan 01st 2006
245 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#122223, "Got codes checked."


          

Ok so I went to Advance and got them to check my codes.

Car: 95 Eclipse RS

Problems: Check Engine Sometimes is on only after warmup, sometimes stays on when cold.

Key Dance Codes: 12, 11, 55

Advance OBDII Results:

"P1390:
Manfacurer Contrl.
Igntions System Misfire" - Only code they got.

I have an extra coil pack I was going to try. All of my plugs look fine. No Oil, White/tannish color, No signs of wear.

My question is: What could cause this besides plugs or coil pack? Would this have something to do with the code 11 and check engine only comming on sometimes? Thanks in advance.

Thanks, Brandon

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic
RE: Got codes checked., saikou, Feb-20-06 02:01 PM, #1
RE: Got codes checked., 95Eclipse302, Feb-20-06 02:07 PM, #2
      RE: Got codes checked., saikou, Feb-20-06 02:14 PM, #3
           RE: Got codes checked., 95Eclipse302, Feb-20-06 02:53 PM, #4
                RE: Got codes checked., saikou, Feb-20-06 03:18 PM, #5
                     RE: Got codes checked., 98VengeI4, Feb-21-06 04:21 AM, #6
                          RE: Got codes checked., mcgyvr, Feb-21-06 07:18 AM, #7
                               RE: Got codes checked., saikou, Feb-21-06 07:58 AM, #8

saikouFeb-20-06 02:01 PM
Member since Nov 24th 2005
454 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#122224, "RE: Got codes checked."
In response to Reply # 0
Feb-20-06 02:06 PM by saikou



          

Originally posted by 95Eclipse302
Ok so I went to Advance and got them to check my codes. Car: 95 Eclipse RS Problems: Check Engine Sometimes is on only after warmup, sometimes stays on when cold. Key Dance Codes: 12, 11, 55 Advance OBDII Results: "P1390: Manfacurer Contrl. Igntions System Misfire" - Only code they got. I have an extra coil pack I was going to try. All of my plugs look fine. No Oil, White/tannish color, No signs of wear. My question is: What could cause this besides plugs or coil pack? Would this have something to do with the code 11 and check engine only comming on sometimes? Thanks in advance.


I have the same CEL code, 11 and same year model.
The P1390 actually means timing belt skipped one tooth, however, I would put that aside right now... unless you recently did a timing belt change. So, you're saying your CEL only comes on sometimes? When your CEL comes on, does anything happen to the car? For example, does the car turn off randomly or buck whenever the light comes on/turns off?

If you have an extra coil pack, I'd say go ahead and swap it in to see if it solves anything; it wouldn't hurt. If not, you have 2 good coil packs and could probably sell one. emoji Then move onto the plug wires and spark plugs. Let me know how things turn out.

::EDIT::
Well, I was thinking... you mentioned that your plugs were completely fine. You could be having a short somewhere among your harnesses, possibly. If you still have the EGR pipe, take a look at the harness that runs right along underneath it; sometimes the EGR pipe likes to get hot, exposing the wires and then shorting them out.
Although, I'm just trying to give suggestions as I'm still trying to find out how to get rid of the damn code myself. emoji

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
95Eclipse302Feb-20-06 02:07 PM
Member since Jan 01st 2006
245 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#122225, "RE: Got codes checked."
In response to Reply # 1


          

Well not sure how old timing is but I kno it has been done. It has a Good Year gator belt. I dont think its timing because the car runs great. And no when the cel pops on it never jerks or anything.

Thanks, Brandon

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

        
saikouFeb-20-06 02:14 PM
Member since Nov 24th 2005
454 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#122226, "RE: Got codes checked."
In response to Reply # 2




          

Hmm...
I think you're going through the same EXACT & I mean the EXACT damn problem I'm going through. It sucks, because my car runs completely fine as well, but the code 11 CEL likes to pop up randomly; meaning it'd be kinda difficult to track the issue right away because it likes to go away.

I also have an extra coil pack I'm going to throw on tomorrow to see if it does the trick. Right now I'm running on an MSD Blaster Coil and MSD 8.5mm plug wires.

What exactly have you replaced lately? I've done the following:
Camshaft and Crankshaft Position Sensors
Idle Air Control valve

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

            
95Eclipse302Feb-20-06 02:53 PM
Member since Jan 01st 2006
245 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#122227, "RE: Got codes checked."
In response to Reply # 3


          

only thing i have changed is oil and intake lol.

Does your temp gauge go up ever ? And move around?
Imma check my sensors tomorrow. See if any are loose

Thanks, Brandon

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                
saikouFeb-20-06 03:18 PM
Member since Nov 24th 2005
454 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#122228, "RE: Got codes checked."
In response to Reply # 4
Feb-20-06 03:58 PM by saikou



          

Originally posted by 95Eclipse302
only thing i have changed is oil and intake lol. Does your temp gauge go up ever ? And move around? Imma check my sensors tomorrow. See if any are loose


It only moves up to operating temperature, lol.
I have a fairly new radiator that was on the car when I bought it.

Anyone have anything to chime in possibly?

::EDIT::
You know what, for my situation, I'm wondering if it's as stupid as the gap on my plugs. Because I buy the BKR6ES-11 NGK spark plugs and simply toss 'em in there without gapping them. Apparently they're pre-gapped? Could this constitute to the problem at all?

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                    
98VengeI4Feb-21-06 04:21 AM
Member since Mar 10th 2002
282 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#122229, "RE: Got codes checked."
In response to Reply # 5


          

Originally posted by saikou
Originally posted by 95Eclipse302 only thing i have changed is oil and intake lol. Does your temp gauge go up ever ? And move around? Imma check my sensors tomorrow. See if any are loose
It only moves up to operating temperature, lol. I have a fairly new radiator that was on the car when I bought it. Anyone have anything to chime in possibly? ::EDIT:: You know what, for my situation, I'm wondering if it's as stupid as the gap on my plugs. Because I buy the BKR6ES-11 NGK spark plugs and simply toss 'em in there without gapping them. Apparently they're pre-gapped? Could this constitute to the problem at all?


I just use the regular ngk v-powers but mine were NOT pre-gapped.
I would check that out.

-Nate
________________
-97 Avenger I4 5spd (R.I.P.)
-95 Eclipse GS 5spd
-Mods: Megan Header ,Megan Racing Cat-Back
All-Motor Buildup on the way

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                        
mcgyvrFeb-21-06 07:18 AM
Old School 2GNTer
3121 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#122230, "RE: Got codes checked."
In response to Reply # 6


          

crank sensor, replace it

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                            
saikouFeb-21-06 07:58 AM
Member since Nov 24th 2005
454 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#122231, "RE: Got codes checked."
In response to Reply # 7




          

Originally posted by mcgyvr
crank sensor, replace it


I feel bad for taking over this guy's thread, but I have already replaced my crank sensor. However, I'm going to go in and re-due it since I half-assed it by just twisting the wires together and shrinking heat-shrink tubes onto the connections.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Top 2GNT Technical Performance/Engine topic #122223 Previous topic | Next topic
Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com
Generated in 0.077 seconds, executing 30 queries.