#118786, "So the question is where to put Jack and Jack Stands" Jun-23-07 06:55 AM by RallyEclipse98
I've searched and there is some useful information but all the pictures have gone bad. Where should I place the jack and jack stands for both front and back? This will be for a good length of time so no "well that worked when I changed the oil, but things were wobbly" lol. Thanks!
Pictures would be great and if you guys were in storage that long, you'd be up on jack stands wouldn't you, or no? Talking year(s).
#118787, "RE: So the question is where to put Jack and Jack Stands" In response to Reply # 0
I usually jack right where the lower crossmember meets the radiator support right in the front and put the jackstands right behind the tires on the rocker panel. For the rear, I jack right in the middle of the long metal thing right around where the wheels are attached to. Sorry I feel dumb because I don't remember what it's called I put the jack stands on the rocker panel then in front of the rear tires. Very sturdy.
Mike D -------------------------------------------------------------------------------------------------
Originally posted by DR1665 You're welcome to all the beer you can drink, but you have to go get it yourself. Don't get pissy when we point to the fridge and tell you to get it yourself.
#118789, "RE: So the question is where to put Jack and Jack Stands" In response to Reply # 2
Originally posted by Slimyjr. Are you kidding me!!?? Hate to be mean but have you ever jacked a car up??? Just put the stands somewhere sturdy, like the chassis, pinch welds, ect.
^lol Never jacked it up with jackstands. Hydrolic lift FTW! But I can't really occupy one for a year can I?
I want to make sure I have them in good spots not like some others who bent things because they don't find out good spots for the jacks first and then have trouble because they can't get screws etc. out cause stuff's bent. Anyone have pictures? Thanks total05 though, that's what I'm sort of thinking mostly. I'm thinking crossmembers in front (where the three meet, just behind the screws), and in the back, the rear differential to jack. And then pretty much the places you said for the jack stands.
#118793, "RE: So the question is where to put Jack and Jack Stands" In response to Reply # 6
Originally posted by chris712vt Front, pic taken behind front wheel. I usually jack from the right arrow (where Mike mentioned) and put my jack stands above the left arrow. Rear, pic taken in in front of rear wheel. I jack from above the right arrow and put my stands on that flat part of the steel above the left arrow. Hope that helps you.
Thanks for doing that!
Quote: The proper jacking points are listed in the owners manual and also pages 00-24 and 00-25 in the general section of Volume I of the service manual.
The rear jacking point is the rear differential. The manual shows a block of wood between the jack and the rear dif to help prevent damage.
The front jacking point is just behind the two bolts that attach the cross member that runs the length of the car to the cross member that runs across the very front of the car. Again a block of wood is shown to help prevent damage to the crossmember.
If you look at the seam/ridge that runs along the bottom of the car (where you would normally mount the stock jack) there will be two bumps in the ridge just to the center of the car from each tire. Between these two bumps is where you want to mount the stock jack, or your jackstands. The manual shows a block of wood or some rubber on the jackstands to prevent damage to the seam. My jackstands actually have a small notch in them that matches the ridge pretty good.
Mark Rieb
^ This is where I got the part about the rear differential. I feel really newb. Didn't realize it was for a TSi and was in a bit of a hurry so didn't realize "differential" was in the sentence I guess. The quotes from DSMtalk.com.
#118794, "RE: So the question is where to put Jack and Jack Stands" In response to Reply # 7
Originally posted by RallyEclipse98 The rear jacking point is the rear differential. The manual shows a block of wood between the jack and the rear dif to help prevent damage.
no diff, it's the rear suspension crossmember
Erik P. Official 2GNT thread Hijacker Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be... All we know is, He's not The Stig... But he is The Stig's Spartan cousin!
#118795, "RE: So the question is where to put Jack and Jack Stands" In response to Reply # 8 Jun-25-07 04:55 PM by foggy45
spent almost 6 months like this. never wobbled a bit, and i was even climbing all over the engine compartment when i was putting the engine back in.
(looks tilted, but thats just the angle of the picture, it was actually level)
______________________________________ ______________________________________ "Don't fear the weapon, fear the soul of the warrior using it." "My CEL only goes off when i remove my battery."
Best sum up of working on a 2GNT DR1665- "#5. Spike that motherfucker on the garage floor and grab a beer. You deserve it."
Ahhhh Priceless . . . eclipse982nrRST "its actually lightish red" RoninEclipse2G "yeah, they already have a color for that... it's called PINK"
#118796, "RE: So the question is where to put Jack and Jack Stands" In response to Reply # 9
Originally posted by foggy45 spent almost 6 months like this. never wobbled a bit, and i was even climbing all over the engine compartment when i was putting the engine back in. (looks tilted, but thats just the angle of the picture, it was actually level)
Thanks for your pic, though the jack stands look like their in different spots than in the pics earlier in the thread...? Nice Jack Stands btw, I just got some like those a few days ago. GM Goodwrench. You like them I assume?
#118797, "RE: So the question is where to put Jack and Jack Stands" In response to Reply # 10
pinned jackstands are safer than the "ratchet" (I think thats what you call them) style, if you bump the handle on those just right it can bring a car down on you.
Erik P. Official 2GNT thread Hijacker Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be... All we know is, He's not The Stig... But he is The Stig's Spartan cousin!
#118798, "RE: So the question is where to put Jack and Jack Stands" In response to Reply # 11
I think that depends on the jackstand that you have. The ones I use have a cam type lock. You can pull up on the handle and as long as there is weight on it, you can't lift it.
#118799, "RE: So the question is where to put Jack and Jack Stands" In response to Reply # 12
yeah they are the camed 3-ton GM Goodwrench ones from Sears. i like em, light and small enough to not be a pain when there not under the car, yet very stable.
much better then my dads 15-ton truck jack stands
______________________________________ ______________________________________ "Don't fear the weapon, fear the soul of the warrior using it." "My CEL only goes off when i remove my battery."
Best sum up of working on a 2GNT DR1665- "#5. Spike that motherfucker on the garage floor and grab a beer. You deserve it."
Ahhhh Priceless . . . eclipse982nrRST "its actually lightish red" RoninEclipse2G "yeah, they already have a color for that... it's called PINK"
#118800, "RE: So the question is where to put Jack and Jack Stands" In response to Reply # 12
Originally posted by freelancefool I think that depends on the jackstand that you have. The ones I use have a cam type lock. You can pull up on the handle and as long as there is weight on it, you can't lift it.
I think you're thinking of Avery jacks. Dangerous things....
Search
Printer-friendly copy
0 Users in Chat
Where should I place the jack and jack stands for both front and back? This will be for a good length of time so no "well that worked when I changed the oil, but things were wobbly" lol. Thanks! 
I put the jack stands on the rocker panel then in front of the rear tires. Very sturdy.
Hate to be mean but have you ever jacked a car up??? Just put the stands somewhere sturdy, like the chassis, pinch welds, ect.
