i searched for a writeup on the throttlebody install, and to no avial.

i need the size and name of the wrench, i think its called a torx wrench that is used to get the sensors off the throttle body.

tia

03 srt-4 13.130@112.47mph (n2o, stock turbo, 10/2003)
now: 20g, portfueler, bpu+++ (track/dyno times tbd...)

i farted on your wiki

yes it's torx wrench. They come in two diff. kind. Get the torx socket type. I size is #20.

96 RST: Star Performance stag
05 scion xb: bolt ons
92 nissan 240sx
07 toyota sienna

im doing my tb install tomorrow.. is there anything i should be careful of? or is it fairly straight foward? any tips appreciated. tia.

^^what once was^^


^^what is now.. and permanently^^

its pretty straight forward.i havent installed the bored one yet, but the stock one was easy to get off, 2 bolts i think like 12 or 13 mm.

the sensors have clips on them, i labeled them top, and bottom.

when taking off the sensors, be careful to not strip the female part on the screw. i busted a bolt on one of the sensors, but was able to jerry rig it with a bolt and a nut.
i twisted the first torx wrench i bought at an auto store, went to home depot with the t/b, and got a stonger torx driver that pulled the remaining screws out.

pretty easy mod, waiting for it to come back from howell was the worst part. ill post my gains once all of my projects are finished for this weekend.

03 srt-4 13.130@112.47mph (n2o, stock turbo, 10/2003)
now: 20g, portfueler, bpu+++ (track/dyno times tbd...)

i farted on your wiki