Well today I tried to disassemble my engine. Tried to take of the crankshaft pully and it was a no go. It suppose to just come off right. I told off the bolt. But still does not want to come off. Any tips?
#115813, "RE: Hard time pulling the crankshaft pully" In response to Reply # 0
You need to rent a tool. Try autozone you can rent them for about $60, but you get your money back when you return it. I believe its called a chrysler harmonic damper puller. You can try any 3 jaw puller but the chrysler one works the best for me.
#115814, "RE: Hard time pulling the crankshaft pully" In response to Reply # 0
Originally posted by sadc Well today I tried to disassemble my engine. Tried to take of the crankshaft pully and it was a no go. It suppose to just come off right. I told off the bolt. But still does not want to come off. Any tips?
Ummmm??? Are you using a puller b/c reading your post i'm not even sure if you are or if you just expected it to slide off. Anyways go to your local advance/auto zone and rent a 5 ton 3 jaw puller specifically for chrysler applications (it will say so in the little instruction book that comes with it). Anything less and you'll probably have issues trying to get it off
I contributed to the Wiki! EVO IX - just a really expensive boost gauge and a K&N air filter 96 Eclipse RS -awaiting registration and inspection 95 Eclipse GS - parts car Mods/Profile - http://www.2gnt.com/index.php?d=cs82685
#115815, "RE: Hard time pulling the crankshaft pully" In response to Reply # 2
Advanced Auto has an $89.00 loaner tool that may or may not work. It is a heavy duty puller that usually works. I have ruined probably 5 of their pullers because some come off harder than others, but luckily, it is a free replacement item. I have kept the 2 pullers that seem to always work without any more stripping of the threads. You'll see.
#115817, "RE: Hard time pulling the crankshaft pully" In response to Reply # 4
Just go to your local auto parts store that rents tools. Ask for a Chrysler jawed pulley puller. Pay the deposit, do the job, return tool and get your money back.
Erik P. Official 2GNT thread Hijacker Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be... All we know is, He's not The Stig... But he is The Stig's Spartan cousin!
#115818, "RE: Hard time pulling the crankshaft pully" In response to Reply # 5
Around here we have VIP Auto Parts stores and they carry (and I think Autozone does too) OEM Tools for loaners, and it's called the Chrysler Harmonic Dampener Puller. It's basically a 3 jaw puller with an attachment for the crank snout, and it just pulls the sucker right off, I used an impact gun and it was a snap. Remember to go on the inside of the pulley, if you go on the outside edge it will wreck it.
#115819, "RE: Hard time pulling the crankshaft pully" In response to Reply # 6
Originally posted by ligerzero Around here we have VIP Auto Parts stores and they carry (and I think Autozone does too) OEM Tools for loaners, and it's called the Chrysler Harmonic Dampener Puller. It's basically a 3 jaw puller with an attachment for the crank snout, and it just pulls the sucker right off, I used an impact gun and it was a snap. Remember to go on the inside of the pulley, if you go on the outside edge it will wreck it. Just for your info : http://oem-tools.com/product_info.php?cPath=22&products_id=1808 It's tool 27139.
Ah, we have a winner
Captain Caveman
96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq 97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq 98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats 99 OZ 5sp Stocker 15.856 @ 85.97 99 GS stocker auto 17.7@77mph!
Search
Printer-friendly copy
2 Users in Chat
