All,

I am trying to guage interest in a Quad throttle body setup for our cars.
I am going to be developing a quad throttle body this week and next for our cars.
The first incarnation wil utilise the existing lower intake section...

I would like to know the answers to the following questions:

1.) How many would be TRULY interested... i.e. if one was made, would you buy it?
2.) How much would you pay?

The 2nd is important because I will bring the product to us all for the lowest price possible.... so give me a ballpark figure to work with...

Lee.

what would be the ease of installation and possible power gains? Sounds interesting as an alternative to the indy manifold.

2003 Acura RSX Type-S
15.042 @ 93.06
Devon
Creator of one of the longest and most controversial posts in 2gnt history...
http://forums.2gnt.com/dcboard.php?az=show_topic&forum=38&topic_id=112462&mesg_id=112462&page=

Having a quad throttle body on our car will have a negitive effect, due to lack of high air velocity, unless you have a turbo, in that case the extra turbo lag would compliment the free'er flowing TB.

Most people will agree they are not practicle for a small displacment engine.

http://forums.2gnt.com/dcboard.php?az=show_topic&forum=32&topic_id=3&mesg_id=3&page=



i left that topic shortly after i started it, as to not make a fool of myself....however ive learned a LOT from it. just thought id post it here as it is relevent to the situation. take from it what you can.

:shhh: i do cocaine :/shhh:

if you do come up with a QTB setup your going to have to include a haltech fuel ECU (or look into the megasquirt) in it along with a highflow fuel pump and larger injectors.

a QTB setup can easily be machined from a block of aluminum and then use a lathe to turn the TB plates/shaft,etc.. o-ring the shaft between each throttle body and you can even machine the map/vacuum line sections right into the block of aluminum. you do need to also machine an adapter plate to line up the runners on the lower intake manifold being that the 2 runners in the middle are offset from the others.


and a QTB setup would have awesome results on our cars, but you will need some drag cams and higher compression to really see the full benefits.

and if you can't beat 2100 bucks complete then its not worth it as RPW already has a quat TB setup for us, or can make one easily, Ive already been quoted 2100 w/haltech from them

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

I still say it can be done without a stand alone. The S-AFC or other piggyback should be able to allow a great enough amount of adjustability to get her running. And it has been done on a stock ECU for the Neon guys.

I am slowly as a side thing working on mine I have the TB, and just need to get the lower manifold sorted out and build my vaccum rail. I want to get a couple other things done first before I put that on, so I'm not hurrying. I was hoping for the Shoot Out, but highly unlikely.

I don't think that using a stock lower plenum is worth it. If I was going to pay for one, which you could sell for around $800/$1000 including an S-AFC, I would imagine. I would want a new lower manifold. I just need to find time with my welder... oh... Steve

Yes this set up will be far more benefitial with cams and high compression. A quad TB set up is not going to be your first bolt on here, at least not if you're smart, and the gains available are greater than any single TB set up, in my opinion anyway.



15.9 @ 86.7mph

Injen CAI, 55mm TB, P&P Intake, Crower Cams, Hooker Header, ERT/Catco Cat, GS-T Muffler, AFX UDP, Crane Ign Amp, S-AFC

look in the archives and you'll see it has been done already by a neon dude, he even posted movies of the car running woohoo man did that intake sound mean. some cars do have ITBs and they're not turbocharged ITBs give you more air and give you superb throttle response from what I hear. But yeh like they said you probably wanna get cams and stuff with it also.

http://www.hadesomega.info -car specz and movies 95 Eclipse RS | 76' 280Z | 89' MR2 | 99 Neon | 91 Zephyr
Who sez FF can't drift?

Muuwahahahaaahaaaa

Got the cams already, heheeeehee! I just need to cash and the free time to finish the set-up.



15.9 @ 86.7mph

Injen CAI, 55mm TB, P&P Intake, Crower Cams, Hooker Header, ERT/Catco Cat, GS-T Muffler, AFX UDP, Crane Ign Amp, S-AFC

Well once I get the 60mm TB's done next week I'll be starting the work on the Quad TB setup...

Take a look at this once... www.centroidcnc.com
Thats where I work, so as you can probably guess... we have the technology...

Because of the disbelievers.... I'll just post pics of the Quad setup when its running... And if your going to the OH DSM meet in july then I'll prolly have it running on my car then also....

Lee.

I should be at the Ohio SHoot Out, I'd love to see what you've come up with. If you have any questions feel free to hit me up over e-mail or aol IM. I'd be happy to help, since I've done some research into this.



15.9 @ 86.7mph

Injen CAI, 55mm TB, P&P Intake, Crower Cams, Hooker Header, ERT/Catco Cat, GS-T Muffler, AFX UDP, Crane Ign Amp, S-AFC

>and if you can't beat 2100 bucks complete then its not worth
>it as RPW already has a quat TB setup for us, or can make one
>easily, Ive already been quoted 2100 w/haltech from them


my friend ordered their set up for his eclipse and that is the price he recieved but they wanted him to send in an intake manifold in so they could make one because they have never done it on a 420a. (they are out of australia and i dont think they have this engine down under) they'll make one for 2g's tho if anyone wants to be a guinea pig.

-jason

>my friend ordered their set up for his eclipse and that is the
>price he recieved but they wanted him to send in an intake
>manifold in so they could make one because they have never
>done it on a 420a. (they are out of australia and i dont think
>they have this engine down under) they'll make one for 2g's
>tho if anyone wants to be a guinea pig.


Uhm, i'm not ordering any performance parts for a my car from a company that has never seen our engine!

This is my first time posting but i have been looking onto the quads. Im bout to go to boot camp but after i get out i would be glad to be the test dummy for it. Would it cost a thing for me? just asking cause money is somewhat tight but the bonus im getting would help lol.

Old post man........

You're going to have to do a better job with checking the dates on threads if you want to get any decent results.

Not only is this thread over 5 years old, but the OP never finished this idea, stole a bunch of money from a bunch of people, and has been banned.

So ya, probably not going to get a unit to test from him for free.

.........................................................................................................................

Built. That's All...
.........................................................................................................................
www.monkeybuttpirate.com
.........................................................................................................................
2 Fingers of Scotch with a milk back... Stat!

1998 Eclipse RS-T - Totaled 4/23/09 -
1998 Eclipse GST - Stroked 2.3l, HX40 fed: Build in progress
2010 Subaru Outback Limited

I hate hipsters.

lol i didnt read the time but thanx for the lesson in the whole thing. first time posting so my bad.

Captain Caveman

96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq
97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq
98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats
99 OZ 5sp Stocker 15.856 @ 85.97
99 GS stocker auto 17.7@77mph!

wiki home page:http://www.2gnt.com/index.php?d=bullettdsm

Make your own.

Hint: use the search next time. This has been discussed ALOT.

Best way to go about it is a full custom manifold built from scratch.

Build it yourself. It's not hard. Google itb. Wiki itb. You'll find a shitload of info.

Foggy45 and myself have talked about several ideas but they're just that, ideas. I'm wanting to do the itb/turbo setup one day. Maybe not on my 2gnt, maybe not on my next project but definately something that didn't offer that as a stock option. *cough* rb26dett *cough*

Again, ALL CUSTOM.

It's not like we have a k20a1 that already has kits available.....

Goodnight sweetheart...yes its time to go...bum bum bum bum bum...good night sweetheart yes I am one little a$$hole......bum bum bum bum....

Erik P.
Official 2GNT thread Hijacker
Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be...
All we know is, He's not The Stig... But he is The Stig's Spartan cousin!