ive been seriously looking into doing an evo motor swap in the GS for a few reasons, mainly being just different... im just looking to get a good discussion started on whats required and some helpful thoughts... also keep in mind.. i am working with Vineet on this (the man who built the twin engine talon) so... ive researched this as much as i can.. so any imput or things i may be missing are welcome cause hey 2000 heads are better than one.

Travis
************
Blue 93 Talon AWD
Best Time 11.9 w/ 104 octane
-Objects in mirror are getting thier asses kicked-

Strip the engine bay, completely.
ECU
wiring harness (with extra wiring for any adjustment)
A good welder for custom mounts, piping, etc.
Wiring diagrams so you are able to either splice into stock gauges and interior wiring, plus make sure you get it all wired in right.
Custom throttle cable (probably), maybe custom trans linkage as well.
Custom driveshaft, or maybe HUB swap.
^ All depends on what trans you plan on using.
There's a matter of rolling diameter on your tires and speedometer calibrations.

And the number one thing: patience
You thought you've had downtime before...



15.9 @ 86.7mph

Smooth idle? We don't need no stinking smooth idle.

Mods List:
http://highlander.dsmpower.com/sig.htm

if i remember correctly, they put the cam gears on the pass side for the evo like ours so maybe the driveshaft is on the same side as ours. that would solve that issue. but then again youd still have motor mounts and well...everything else required for a 2g 4g63 engine swap.

-----------------------------------------
2011 Nissan Xterra Pro-4x

2007 Kawasaki Ninja 650R

1996 Mitsubishi Eclipse RS-NX 75 shot, AEM CAI, P&P t/b and intake mani-SOLD

1964 Buick Electra 225-all original, all power options, 325hp, 445ft/lbs tq

buy donor 4g63 turbo car strip 2gnt strip 4g63 swap... *INSERT BLOOD TEARS LOTSA BEER AND FUN!*



laughs ata turbo 420a ina gst body ad having a gst title.. LMAO

bILL

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

off topic, is he gonna post any more vids of his twin engine talon any time soon?

i wish you good luck with your swap my friend. it will be a long drawn out process, just stick to it.

___________________________________________

it would be a WHOLE lot easier if the car were a 2G turbo 4G63 car.

1990 Eclipse GS-T

Yes and no- the drivetrain would be easier if the recipient car was an AWD, but the mounts in the engine bay are more compatable from the 420a then the US Spec 4G63. Then again, the wiring would be a bitch.
<shrug>

Someone try it and let us know. Mmmkay?

-=B-=

Dude, Boeing called. They want their wing back.

Dark0ne95: There is a butthole on that girl that his going to feel the wrath of 23 yeras of worldwide hate.
Me: Can I put that in my sig?
Dark0ne95: GO right fucking ahead.

remember you need an evo IV and up, you will have to use the transmission because the engine spins counterclockwise. the wiring won't be that bad if you use the evo wiring to run the engine, and splice the guages, etc. into the stock harness. for the axles the GST axles will work if you use the GST brakes. You will still probably have to make all of the mounts but I think it will be a lot more simple than swaping a US/cyborg 4g63.

Damn, it spins counterclockwise in relation to the crank pulley? Damn, there goes my cool, but crazy idea.
-=B-=

Dude, Boeing called. They want their wing back.

Dark0ne95: There is a butthole on that girl that his going to feel the wrath of 23 yeras of worldwide hate.
Me: Can I put that in my sig?
Dark0ne95: GO right fucking ahead.

sorry dude. Just get a us lancer trans.

My crazy idea was to adapt the Evo driveline to a 420a, using an adaptor plate, custom clutch, whatever halfshafts fit, and putting the Evo rear diff in the GSX rear diff case. Ah well, it would have been cool. I guess I coul race in reverse, though...
-=B-=

Dude, Boeing called. They want their wing back.

Dark0ne95: There is a butthole on that girl that his going to feel the wrath of 23 yeras of worldwide hate.
Me: Can I put that in my sig?
Dark0ne95: GO right fucking ahead.

>My crazy idea was to adapt the Evo driveline to a 420a, using
>an adaptor plate, custom clutch, whatever halfshafts fit, and
>putting the Evo rear diff in the GSX rear diff case. Ah well,
>it would have been cool. I guess I coul race in reverse,
>though...
>-=B-=


LMAO! I would love to see a Eclipse kick some honda ass in reverse! Holy shit that would be so funny.

Well back to the topic...
A guy took a EVO IV motor and drivetrain and swapped it into a 2001 Hyundai Accent so I believe you can do this with your 2gnt. It took the guy 2 years to complete but it was well worth it. Just take your time and post lots and lots of pic .

www.ChicagoArea240sx.Editboard.com

ummm, an evo3 motor drops into a 2g 4g63 car....

1990 Eclipse GS-T

Well, we were discussing the later Evo motor that is mounted like our trusty 420a.
-=B-=

Dude, Boeing called. They want their wing back.

Dark0ne95: There is a butthole on that girl that his going to feel the wrath of 23 yeras of worldwide hate.
Me: Can I put that in my sig?
Dark0ne95: GO right fucking ahead.

i dont know that much about the evo motors and everything swapin...but here pretty soon i'll be buildin a Honda CRX GSX... gettin 2 wrecks(no motors in either)and buyin everything needed from buschur racing...the light weight body of a gutted crx and the power of a turbocharged dsm...gotta love it...



cai,p&p tb,msd coil pack and 8.5mm wires,plat+4 plugs,header,high flow cat,dual dtm styl muffler,final gear mod,and shift kit

QUOTE: "i dont know that much about the evo motors and everything swapin...but here pretty soon i'll be buildin a Honda CRX GSX... gettin 2 wrecks(no motors in either)and buyin everything needed from buschur racing...the light weight body of a gutted crx and the power of a turbocharged dsm...gotta love it..."

--------------------------------------
fwiw... I know David Buschur, and the CRX he built had over $15,000 just in the chassis... and still was a major beyatch to keep straight down the track.




420a and ej20... much boost by both

A cool idea for a swap would be a mitsubishi FTO MIVEC V6 engine swapped into a 420a, then turbo it. mivec is kinda like vtec without the rice.

I am against engine swaps. Unless its a honda. Those are easy. But why even waste your time and money? If you want to be different paint your car pink with purple polka dots. This reminds me of the infamous "Can i put a 4g63 in my GS/RS?"

Dave
05 Ford F150 SuperCrew FX4