I know Michael put a resistor in place of his EGR and hasn't gotten a code. Anyone know what size resistor would be required to eliminate the code?

I put a 150 ohm resistor in place of the EGR sensor and NO CHECK ENGINE LIGHT!

Have fun boys!

looks like were doin another mod for my car this weekend!!! woot woot

Hell yeah. where exactly does the resistor go? any pics?

Oh yeah and is this for the no flow code.

Thanks

95 eclipse RS

14.80 @ 94mph with no turbo

Did you guys use a 1/2 watt resistor? How hot is it getting?

Thx.

its supposed to be a 1.2K 10watt resistor, yes 10 watt thats what comes with egr blockoff kits.

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

nevermind. it came back. I'm still messin with it to try to get rid of it. I'll keep you guys posted.

just get some vac caps and cap the egr off... unless you already tore it apart. and if your really cheap like me, cut the rubber hose and stuff two bolts in the ends.

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.

I already removed it and capped it off. I just want to find a way to get rid of the CEL. I'd like to keep that light for more useful information than just that dumb EGR code.

Update-I tried putting in a variable resistor and it didn't seem to work. I tied a 1k resistor last night and it was gone for a little while but came back agian. The 150 ohm resistor made the code go away a bit longer. I'm going to try installing the EGR actuator (not the actual valve, I'm talking about the plastic thing) and try fooling that sucker into thinking it's still attached and working.

I'm on a mission now

which code are you getting, the one for egr system failure or the insufficient egr flow, the first you can get rid of with a 1.2K ohm 10 watt resistor, the flow code you cant get rid of without a relay that energizes with the egr solenoid and intorduces a resistor inline with the o2 sensor to lower its output voltage only when hte solenoid is activated But I dont know the value for that, probably just a little one like the 330 ohm or less

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

You will never be able to rid the "insufficient flow" EGR code. The ECU performs a test on the EGR system, usually at cold startup, on occasion. What happens is the ECU closes off the Idle Air control vlave. Then it tires to open up the EGR vlave to compensate for the lost air from the IAC. If the EGR isnt working(blocked off), then the motor will stumble a bit, then trip the CEL code. Unless you have a way to introduce air, and the correct amount of air, into the motor when the EGR test is performed, then there is NO way to get rid of that CEL. Dont waste your time with resistors. Now, you can use a resistor to fool the ECU to think that the actual EGR solenoid is there. But i just leave my solenoid connected for that. Its small enough anyway to leave in there..

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

not to sound like a noob but how exactly can I FIX the insufficient flow problem? I don't want to just block the CEL, I want to take care of the problem.
__________________
Chris
96 ESI 5 spd
Milwaukee, WI

>not to sound like a noob but how exactly can I FIX the
>insufficient flow problem? I don't want to just block the CEL,
>I want to take care of the problem.
>__________________


Fix the egr system, thats the only way, find out what is bad (solenoid,valve,clogged vacuum line, etc..) replace it and then your flow code will go away.

1998 dodge avenger 4 cyl AT
Mods are:
Not enough