Well it is time to tear apart the motor.
I have alot of problems with the motor so
I just decided that I will tear it apart
and start my build up.
Well the car is leaking oil and the trans
mounts are busted up so I need to get them fixed.
This does not look good, yea this is oil all over the under carage.
I thought it was from the time my oil filter fell off because they did not
put it on right when I went for a oil change.
I see oil driping but I am not sure where it is from.
There is no room inbetween the fire wall and engine so
I can't see anything.
I might have to pull out the whole engine.

Ouch...poor tq mounts...

How many miles and what year model?
I love my car...
I love Horsepower...
I love reliability...
So why do i own a DSM again?

95GS and it has 161996 miles.
It needs a head gasket and oil pan also a raditor.
Oh and new mounts.

Well I am about to start to pull the head.
So far all I did was set the #1 piston at tdc
then I ran into a problem turns out my floor jack is no
good so now I have to wait to see if some one can loan me one.
So far this is all that I got done.

Well I worked on the car some more today.
Looks like I need a new belt.
Took of a few things. Took of the tb today.
I am not sure what I want to with the tb maybe I will get one from a jeep
and make it fit. I got sprayed with fuel dang fr had a small amount left in it.
Now I need to get a jack and take off the motor mount.
I am just wondering how the heck I will take off the exhaust pipe.

Great start!

I would definitely redo the head like we talked about.

Check partsdinosaur.com, they have a great price for the timing belt and tensioner package

I will be sure to do that

I contributed to the Wiki!
EVO IX - just a really expensive boost gauge and a K&N air filter
96 Eclipse RS -awaiting registration and inspection
95 Eclipse GS - parts car
Mods/Profile - http://www.2gnt.com/index.php?d=cs82685

the bolts between the dowpipe and the cat is what I am talking about.

I contributed to the Wiki!
EVO IX - just a really expensive boost gauge and a K&N air filter
96 Eclipse RS -awaiting registration and inspection
95 Eclipse GS - parts car
Mods/Profile - http://www.2gnt.com/index.php?d=cs82685

It looks like a PITA.

The bolts from the front exhaust pipe to the cat were the easiest ones for me. It was the bolts after the cat that were rusted to hell.
If your replacing the exhaust then just cut it out.

- Ryan

I think I will take my time on my engine build.
I wan't to have one of the cleanest engine bays.
Think I want to relocate the fuse box and some wires and stuff.
I just wan't some light mods.
Let me see I am thinking header,bored tb, cams rods & pistons, valves, valve springs, retainers,valve guides, high flow fr, fpr,
3g fi, oil pan, cat back exhaust, radiator. Ideas on my build?
Well my goal is to keep it on the road more than a week.
Really I wan't to just rebuild every thing, I wan't to add as much
hp as a could with out a turbo.

Captain Caveman

96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq
97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq
98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats
99 OZ 5sp Stocker 15.856 @ 85.97
99 GS stocker auto 17.7@77mph!

wiki home page:http://www.2gnt.com/index.php?d=bullettdsm

I can't use that I have a automatic.

if you are tearing everything apart anyway, you should just convert it to a manual.

Well I got some more done today.
Pulled out more wires and the radiator.
I am an idiot I for got to drain out the oil
It was cold out side so that is all I got done for now.

Why is there a hose going from my radiator to trans?

sorry that happend, dude. good luck on the rebuild

dude, have you ever gave your car a tune up man. that belt is bad. i dont like when people wait until something brakes to do something about it.


Yea I have but I did not change the belt because I did not know how back then but now I will know how and take care of it.

Got bored and painted my v/c.
Now I need to let it dry and sand the letters down
and another coat of clear. It looks really shiney in person.
I am wating on my w2's so I can take my head to a shop to be rebuilt.
Before

After

Took off some more parts.
Oil all over the im must have been from when I had a bad v/c gasket.:hmm:
This car is going to tick me off already.:banghead:
Did not see any oil around any area of the head so now I am not sure if my gasket is bad
but it is too late now and it needs to be changed already any how. So the next step is pull off the head and look for other leaks and fix them. :aha:



Bad sri filter well the rubber part fell off.

fixed it took off that ruber part and cut half off and wraped it around the sri and then I stuck the filter in and turned it until it was stuck on so it should do for now.:p

your under cariage looks like mine covered in oil. lol. i just put 800 in my car just to drive. they always break

97 RS blown engine

Yea I need to get that oil clean up.

Well I did not like how rusty and how the paint was falling off this line so I had to do this.
I am going to clean every thing until it looks good I don't care if it takes a year.

Now I am not sure if I am going to install these in the car or get rid of them and buy some more parts
that I want to get for my engine.:hmm:

Got the car started up but the timeing is off.:banghead::notgood::sosad:


Well I decided that I am just going to take the whole block apart and rebuild it from the bottom up. As you can see it is not running good tgood: Atleast I know when it is rebuilt it would have all new parts and it will run pretty good.

http://img531.imageshack.us/my.php?image=052409202400zt2.flv

http://img531.imageshack.us/my.php?image=052409201800ni9.flv

I can't believe you used the same EVERYTHING upon re-assembly, Including reinstalling your head w/out checking for flatness. I hope you've been reading

___________________________________________



http://www.2gnt.com/quote_db.php?id=278

Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac
Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim

I am going to do a compression test and go from there.
Most likely everything is going to be rebuilt.

Hope the rebuild goes good.

Make sure you do it properly.

Well I got some more work done to it not much but I do what I can when I have time. Took off some parts clean them up a bit. I am about to order me a 421 header soon can't wait and some other parts.
Dirty parts and junk build up from all the years..


Clean this up a bit.

Took off more parts as you can see I have along way to go.

getting ride of the fuse box is a fun one lol Im working on it right now fuse box ECU and batt. all getting relocated

DRIVE IT LIKE U STOLE IT

Cool man I wanted to do that too but I don't think I want to cut up wires at this point maybe I will do that one day.

I didnt have to cut anything but the headlight harness that was just to make it longer the box I took every terminal out and labeled them yay lol it was fun

DRIVE IT LIKE U STOLE IT

a rebuild from a rebuild. awesome

___________________________________________



http://www.2gnt.com/quote_db.php?id=278

Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac
Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim

hows the project coming?

I did a compression test here are the numbers.
Is this good or bad?
#1. 145
#2. 145
#3. 135
#4. 135

should all be around 180ish

___________________________________________



http://www.2gnt.com/quote_db.php?id=278

Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac
Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim

Erik P.
Official 2GNT thread Hijacker
Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be...
All we know is, He's not The Stig... But he is The Stig's Spartan cousin!

Update well I am tired of the eclipse so I put a price tag on her.
So with the money I get I will be looking for another eclipse most likely a 98 I seen a spyder and a gsx for sale at a car lot here in town that I will look into.

I just finished a high compression build (10.5:1), and have yet to break the new engine in. First compression check was done today and got 210 across the board. Is this normal? Thanks

That sounds about right for a high comp

Erik P.
Official 2GNT thread Hijacker
Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be...
All we know is, He's not The Stig... But he is The Stig's Spartan cousin!

Sweet. I appreciate it! Should my numbers be close to the same afte seating the rings? Or should it read higher?

___________________________________________



http://www.2gnt.com/quote_db.php?id=278

Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac
Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim

Would a 2.2motor automatic from a 2000 cavalier fit in my dsm?

Where's the bitchslap smiley when you need it?

Why the hell would you want to put GM junk in your car?

Is it possible? probably.
Will it cause MOUNTAINS of headaches just trying to get it to work? Almost definitely

Erik P.
Official 2GNT thread Hijacker
Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be...
All we know is, He's not The Stig... But he is The Stig's Spartan cousin!

___________________________________________



http://www.2gnt.com/quote_db.php?id=278

Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac
Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim

Erik P.
Official 2GNT thread Hijacker
Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be...
All we know is, He's not The Stig... But he is The Stig's Spartan cousin!

---

2012 2500HD LML

I don't know but maybe we should all run over to his house with throttle bodies in pillow cases and beat him over the head with them.

ronin, you have some beef w/ me??? feel no luvvv

___________________________________________



http://www.2gnt.com/quote_db.php?id=278

Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac
Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim

I think an SRT4 swap will work nicely But use our 420a head instead of the SRT one.

Will it be cheap...NOPE...but it would be nice

661hp & 463tq Worlds highest hp 2gnt soon to be the fastest

Went and bought me some basic parts 4 ngk plugs and the im gasket set and a sri filter. Next I will be ordering a radiator and some other parts I may be needing.

Good progress, looks good.

My wife went and bought me this.
Can't wait to install all these parts.

Well I removed the radiator and installed the ngk's next I have to install the new radiator it was hot out so I took a break and will install it when it cools down a bit.

Well I installed the new radiator.
Went to turn on the car and trans fluid started squirting out a hose so that is not good. I guess my car hates me.

I went and bought new hoses and clamps and installed them and it fixed that leak. so next up I need to pour in some trans fluid what kind of fluid do I use? Now I need to install the im gaske kit.

---

2012 2500HD LML

-MIKE-

Stroked 2.2L

I installed about 5 new trans hoses fixed that problem
Now I need fluid. Next up look for other leaks and fix that.


Next up install the im gaskets later on buy a new oil pan
my has a dent in it from where I hit a bump in the past.
Maybe after I fix all the small things I will install a 4 2 1 header.

Removed this plastic cover now only if I can find the bolts to my bumper.

Put back on the bumper but I am going to have to take it back off because I need to make something for that plastic part I took off.

I am now going to start working on the dsm now that the weather is starting to get cooler. I am going to pull the head first so here are the pics of a fresh start and I will post updates and pics each day as I work on the dsm. Maybe it will be ready by xmas and that would be my gift to myself

How it looks now.

Here we go again about to pull the head off soon as I drain all the fluids.
I wonder what the damage is.:hmm:

Going to pull this off and paint it later.

---

2012 2500HD LML

dave, ur wasting your time

___________________________________________



http://www.2gnt.com/quote_db.php?id=278

Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac
Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim