#109630, "RE: Can I use the stock fuel line to connect to aeromotive?" In response to Reply # 0
No. our fuel line fitting is an inverted flare fitting. if you look inside the fitting you will see what I am talking about. I suppose if you might be able to piece together a bunch of fittings to make it work.
......................................................................................................................... Built. That's All... ......................................................................................................................... www.monkeybuttpirate.com ......................................................................................................................... 2 Fingers of Scotch with a milk back... Stat!
#109631, "RE: Can I use the stock fuel line to connect to aeromotive?" In response to Reply # 1
All you can do is to buy a 6an pushlock fitting which is the barbed style fitting. Cut the factory line and fight the rubber hose over the barb. It will be very difficult but it can be done. then plumb the rest in 6an.
#109632, "RE: Can I use the stock fuel line to connect to aeromotive?" In response to Reply # 2
Originally posted by Star Turbo Talon All you can do is to buy a 6an pushlock fitting which is the barbed style fitting. Cut the factory line and fight the rubber hose over the barb. It will be very difficult but it can be done. then plumb the rest in 6an.
That's how I did it. It works. Not that tough, just gotta use a little white lube. No leaks on a dual Walbro set-up.
Captain Caveman
96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq 97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq 98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats 99 OZ 5sp Stocker 15.856 @ 85.97 99 GS stocker auto 17.7@77mph!
Search
Printer-friendly copy
2 Users in Chat
