Alright I'm attaching a link to a picture of my fuel set up. Hopefully it will help. I can't really imagine there being a blockage within the fuel line in between the rail and the fpr.
#108771, "RE: starting to get angry (fuel)" In response to Reply # 1
that doesn't make sense at all. If the line's pressurized, you should get fuel everywhere in your lines. Anything obstructing fuel flow that you know of? check the lines. also, why didn't you run the line on the test port... you'll find the problem.
try priming your fuel pump about 5 times, then check that line going to your fpr. You should have a nice surprise. lol
Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim
#108772, "RE: starting to get angry (fuel)" In response to Reply # 2
Yeah thats what I thought too. I have probably primed that thing 5 times each time I've been home to work on it and thats at least once a weekend for the past month. I even took the line off the rail just to make sure fuel was coming out and it did. I'm just really stumped on what to do.
http://www.2gnt.com/graphics/95%20fmu%20set%20up%202.bmp (I would do it this way) From your picture it doesn't look like you even have fuel going into the rail. I would do it the last way just because it would be the easiest. Those are just a few ways that I drew up that you could plumb an fmu into your fuel set up for the 95 fuel rail.
Search
Printer-friendly copy
0 Users in Chat
