Got a set of injectors from a turbocharged volvo, will I be able to use these? TIA

some info I found on them
#0280150804
This Bosch injector is 30lbs/hr at 43.5 psi and has a coil resistance of 2.7 Ohms

Will they work with what? They won't work with your stock ECU/S-FMU without inline resistors or a resistor pack. They'll work just fine with MS.

It sounds like they'll physically fit, but your guess is as good as mine. Our stock injectors are pretty much Bosch double O-ring injectors...

-----------------------------------------

-Paul

Service Manuals and Guides

:-D Believe it or not I've tried this exact scenario on a 98.

The head on those bosch's from the volvo are too small.

If i still had the websites I'd show you the differences... But a good p/n search on google should bring them up.

I did alot of homework on it after my attempt on it.

I should have done it before, now that i know the differences which exist in impedance and all.

And when you do find the right ones just be advised its a p.i.t.a. to get the rail out without moving any part of the manifold.

Loooooots of fun.