| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | Will these injectors work? |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=107492 |
107492, Will these injectors work?
Posted by Nightfall, Jan-26-08 12:51 PM
Got a set of injectors from a turbocharged volvo, will I be able to use these? TIA
some info I found on them
#0280150804
This Bosch injector is 30lbs/hr at 43.5 psi and has a coil resistance of 2.7 Ohms
|
107493, RE: Will these injectors work?
Posted by VelocitaPaola, Jan-26-08 02:03 PM
Will they work with what? They won't work with your stock ECU/S-FMU without inline resistors or a resistor pack. They'll work just fine with MS.
It sounds like they'll physically fit, but your guess is as good as mine. Our stock injectors are pretty much Bosch double O-ring injectors...
|
107496, RE: Will these injectors work?
Posted by dude_33694, Jan-26-08 08:13 PM
:-D Believe it or not I've tried this exact scenario on a 98.
The head on those bosch's from the volvo are too small.
If i still had the websites I'd show you the differences... But a good p/n search on google should bring them up.
I did alot of homework on it after my attempt on it.
I should have done it before, now that i know the differences which exist in impedance and all.
And when you do find the right ones just be advised its a p.i.t.a. to get the rail out without moving any part of the manifold.
Loooooots of fun.
|