I recently hydro locked... i redid the bottme end due to the bent, twisted and broken rod. Then no/ low compression.. so i had the intake valves redone and head serviced. now i turn over and it sounds like it wants to start but doesnt. checked timing... was dead on on the cams and half to one tooth off on the crank.
obvious things... spark- check, got that.... fuel- heres the problem, spits out fuel when cranking, but doesnt prime in the on position and has no pressure when i hit the release on the rail.
Help me!!! its been a year and a half with out a car and i'm finally so close i can taste it. should i replace the ECU, a relay, or what else?? i consult the gurus for the wisdom once again...
1995 RS AT w/206,000 mile KYB AGX w/Eibach Sportline($485.0 ) 10.3mm OBX wires NGK Plugs Toucan Muffler w/2.5" catback OBX Header w/ hollowed kitty Port/Polished Head w/ SS Valves
#107175, "RE: Just replaced head, still no start..." In response to Reply # 0
Try and temporarily run power straight from the battery to the fuel pump. You might have a bad rely that isn't letting the system get to the proper pressure in the fuel system.
#107177, "RE: Just replaced head, still no start..." In response to Reply # 2
Originally posted by bullettdsm
Originally posted by discount_tyr420a checked timing... was dead on on the cams and half to one tooth off on the crank.
This description is incorrect timing......
My thoughts exactly. if you're far enough off, the ECU won't energize the fuel pump relay.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#107184, "RE: Just replaced head, still no start..." In response to Reply # 3
i had the same problem...i just replaced my head after a full rebuild and it wouldnt start. it sounded like it was going to kick over but i didnt. i guess it was the lifters, they werent primed with oil so it took a while for it to start. the car sat for a year before the rebuild.... so check the lifters cuz that could be your problem.
Search
Printer-friendly copy
2 Users in Chat
)
