Hey guys, This might be a damn question. Thus the sohc neon engine block fit ours? Will it bolts to our cylinder head and oil pan? I'd seen alot of those at the yard and no one seem to want it.

96 RST: Star Performance stag
05 scion xb: bolt ons
92 nissan 240sx
07 toyota sienna

It may .. I believe the answer is yes, but i am not 100%.

You may try calling or emailing Gary Howell @ howellautomotive.com (gary@howellautomotive.com) - he may know for sure.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

I also think it does (in terms of neon blocks, without addressing SOHC vs. DOHC). Why? From observing the salvage yards part listings, they list the Neon blocks interchangeably with the 420a eclipse/talon/avenger/sebring blocks.

To carry that over in terms of SOHC vs. DOHC makes sense as well, but I can't commit to a completely definitive answer to that yet.

_____________________________________
Jason ESi-T

04' BMW 325Ci
91' Nissan 240SX
98' Eagle Talon ESi (sold)

but y?


96RS ~ full 99GS special body conversion, aem cai, greddy header, greddy sp exhaust, afx pulley, b&m sS, magecores & NGKs, S-AFC, Sparco Torino, illuminas, prokits, ingalls camber, gunmetal GS rims, ST Sways, STBs, lower rear tie bar, sound system, a shit load more.

97 ~ GSX stock for cock for now but smokes (for the haters) MY 420a. To all the haters _|_ tia

The Original 2GNT []D[][]Y[][]D


96 RS


97 GSX

Same damn reason you have a 1st gen block waiting incase yours gets crankwalk...TO HAVE A SPARE.

------------------------------------------------
98 ESi
95 GS

is the neon SOHC block better than ours? Hehe maybe I get one from the yard too and build that puppy up How much randy?

http://www.hadesomega.info -car specz and movies 95 Eclipse RS | 76' 280Z | 89' MR2 | 99 Neon | 91 Zephyr
Who sez FF can't drift?

i have a 1g motor not block as to put in but not as a spare. he is talking about switching blocks not motors. imo he's better getting stratus block, crank, and internals to get 2.4ltr


96RS ~ full 99GS special body conversion, aem cai, greddy header, greddy sp exhaust, afx pulley, b&m sS, magecores & NGKs, S-AFC, Sparco Torino, illuminas, prokits, ingalls camber, gunmetal GS rims, ST Sways, STBs, lower rear tie bar, sound system, a shit load more.

97 ~ GSX stock for cock for now but smokes (for the haters) MY 420a. To all the haters _|_ tia

The Original 2GNT []D[][]Y[][]D


96 RS


97 GSX

Well, Kory, you might as well just have the 6 bolt block handy, as the 2G head is much better if it is ported to hell. The 1G ports are oversized and the airflow path is unrefined. It has been benchtested that the ported 2G intake manny on the 4G63 is better then the 1G. As for the 420A, it is a good idea to get a whole motor, but if you just get the block, you can make the motor capable of handling gobs of power. The head for us is not too bad of a restriction, nor is it an issue in reliability in a high HP 420a. I would just go ahead and get a whole motor and build it up. Oh, wait, that is what I am doing. :-D
-=B-=

Dude, Boeing called. They want their wing back.

Dark0ne95: There is a butthole on that girl that his going to feel the wrath of 23 yeras of worldwide hate.
Me: Can I put that in my sig?
Dark0ne95: GO right fucking ahead.

I'm looking for a block so i could start building it up. so when my current motor goes out i already have one ready to drop in.

96 RST: Star Performance stag
05 scion xb: bolt ons
92 nissan 240sx
07 toyota sienna

I really don't think it's an issue of better or worse. It's a matter of attaining a spare block and building it up without pulling your current in-use block and building it up.

I believe the only difference between a dsm 420a and a neon 420a (SOHC or DOHC) are the heads. Otherwise, it's all the same. Just think...acquire a neon block for a couple of hundred bucks, get it to a machine shop, have them throw in the internals, and then do a block swap (if not an entire engine swap). Saves you the time of having you car down for all the engine pulling, balancing, blueprinting, boring, and internals buildup. You just have to wait for the new stuff to be put it. Besides that, it appears that neon blocks tend to be significantly CHEAPER than 420a blocks.

It's a plan that I've been entertaining for a long while.

_____________________________________
Jason ESi-T

04' BMW 325Ci
91' Nissan 240SX
98' Eagle Talon ESi (sold)

Interesting think I might go that route when I got some money to burn

Didn't you have an autometer boost gauge randy?

http://www.hadesomega.info -car specz and movies 95 Eclipse RS | 76' 280Z | 89' MR2 | 99 Neon | 91 Zephyr
Who sez FF can't drift?

Hades: i don't know about engine block price yet. I wanna make sure it fit first. I gave my autometer boost guage to my bro. cause i found a greedy boost guage and a greddy BOV at the yard.

96 RST: Star Performance stag
05 scion xb: bolt ons
92 nissan 240sx
07 toyota sienna