#105338, "what connector is this? and whats it go to?"
well, i put another engine in, a 97, into my 96, i changed the crank sensor accordingly, as well as the trans spedo since its 3.55. but i cant figure out where/what these 2 connectors go to.. i dont think they go to cruise control box, b/c well i didnt pull one, but idk if they were there for the posibilty or wha, ne help would be appreciated. thanx
#105339, "RE: what connector is this? and whats it go to?" In response to Reply # 0
Alternator, or the main fuel injection harness.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#105346, "RE: what connector is this? and whats it go to?" In response to Reply # 3
hmm, that sounds promicing, where would its mat ebe then? on the fire wall? i though ti looked every where for its mate, but if its on or really close to the wall, mayb i over looked it.?
#105348, "RE: what connector is this? and whats it go to?" In response to Reply # 4
You misunderstand. Not the injector harness itself, the MAIN FUEL INJECTION HARNESS. There is a large connector that sits roughly where the trans and block meet, north of the oil pressure sending unit, south of the TB. Track the two large alternator wires back to the harness, they all run into the same bundle.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#105349, "RE: what connector is this? and whats it go to?" In response to Reply # 5
ahh, ill check that, the connector shown id from the harness, im tryin to find the mate on the car, but thanx for the info, ill check for its mate around those areas! i let ya know how it goes lol..
#105359, "RE: what connector is this? and whats it go to?" In response to Reply # 10
great, u guys were right on! i found the 1st ones mate, now for the 2nd connector, its got 3 wires, 2 prongs on bottom and 1 on top of the 2..idk where this 1 goes..
#105360, "RE: what connector is this? and whats it go to?" In response to Reply # 11
where is it and what does it look like? give me a visual and i'll tell you where it goes.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#105366, "RE: what connector is this? and whats it go to?" In response to Reply # 13
heres some pix of the last mystery connector it can be reached from unerneath the intake mani, or pulled thru to where i have it cirrcle by the TB. im still clue less to where this 1 goes...
#105380, "RE: what connector is this? and whats it go to?" In response to Reply # 14
uhh that second connector looks very much like the one for the oil pressure sender located on the intake side of the block, about halfway up near the transmission. at least thats what the oil pressure sender connector looks like on my 96. its the only connector ive run across in the harness that has an assurance clip( the red clip on the bottom of the connector in your picture) on it.
#105381, "RE: what connector is this? and whats it go to?" In response to Reply # 14
uhh that second connector looks very much like the one for the oil pressure sender located on the intake side of the block, about halfway up near the transmission. at least thats what the oil pressure sender connector looks like on my 96. its the only connector ive run across in the harness that has an assurance clip( the red clip on the bottom of the connector in your picture) on it.
#105395, "RE: what connector is this? and whats it go to?" In response to Reply # 17
i just did the exact thing you did. i put an engine from an 97 avenger in my 96 eagle and the only sensors the connectors were different on were the IAT, CTS, CAM, and the crank sensor. if that connector has one wire coming out of the back of it its definitly your oil pressure sender connector. if not, then from the location youre describing then here are your other options: TPS, IAC, oil pressure, Knock, Injector, injector harness or VSS. its probably to your VSS on the transmission right below the throtte body area, near the oil pressure sender if its got more than one wire to it. if i remember correctly the VSS should have an assurance clip on it too. if that doesnt help see if you can take a closer picture of the connector, and the wire colors going into it.
#105430, "RE: what connector is this? and whats it go to?" In response to Reply # 18
dosent fit oil press, or the trans connection , its got 3 pins, but only one wire.. and its yellow.. im thinkin is for the cruise cont.. the cars a 5 spd, but theres a lever or sumthin rigged up for cruise (from whom i bought it from,) said it came with the hahn kit for cruise control or sumthin, so could this be the connector to it?
Search
Printer-friendly copy
1 User in Chat
