#104327, "RE: injectors {incase it was deleted from the market section}" In response to Reply # 0
If you are going to request information about injectors, you might want to inform the public what you are planning on using them for. Such as: Hey! I'm planning on running 14psi on a 16g, what injectors can I use that don't require a resistor pack?
#104333, "RE: injectors {incase it was deleted from the market section}" In response to Reply # 1
Originally posted by freelancefool If you are going to request information about injectors, you might want to inform the public what you are planning on using them for. Such as: Hey! I'm planning on running 14psi on a 16g, what injectors can I use that don't require a resistor pack?
Dunno. He used NE (instead of any, or anyone) more than once in a single sentence. Surely that is all the info you could possibly need.
......................................................................................................................... Built. That's All... ......................................................................................................................... www.monkeybuttpirate.com ......................................................................................................................... 2 Fingers of Scotch with a milk back... Stat!
#104335, "RE: injectors {incase it was deleted from the market section}" In response to Reply # 2
I don't like to read between the lines. I was just hoping for a competent post with the proper information. I guess that is a lot to ask for in the world today.
#104350, "RE: injectors {incase it was deleted from the market section}" In response to Reply # 3
Those look like BANME! words to me
Erik P. Official 2GNT thread Hijacker Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be... All we know is, He's not The Stig... But he is The Stig's Spartan cousin!
#104356, "RE: injectors {incase it was deleted from the market section}" In response to Reply # 6
Originally posted by freelancefool
Originally posted by RoninEclipse2G Those look like BANME! words to me
I'm sorry. I was in a bad mood. I shouldn't vent frustration here.
I was talking bout the aol'er speak by the poster, but you were a bit harsh, all's forgiven tho
Erik P. Official 2GNT thread Hijacker Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be... All we know is, He's not The Stig... But he is The Stig's Spartan cousin!
#104365, "RE: injectors {incase it was deleted from the market section}" In response to Reply # 8 May-22-07 05:54 PM by Corbin
First, you should probably decide what size injector you "need". Have a look at: http://www.2gnt.com/index.php?d=How%20to%20Choose%20Fuel%20Injectors if you haven't already. You can get domestic, high impedence injectors in a variety of sizes at reasonable prices. I've used aftermarket Ford Mustang ones before. Once you pick an injector, you'll need to actually supply it with specific fuel pressures in relation to intake manifold pressure. To determine that, check out: http://www.2gnt.com/index.php?d=Choosing%20a%20Fuel%20Pump%20and%20Fuel%20Pressure%20Regulator if you haven't already. From personal experience, I suggest you dump the cartech regulator and don't rely on the S-AFC for anything except ambiance. The Vortech S-FMU is a decent piece that can be configured for your application. I'm sure there are competing models from other manufacturers as well. And one last piece of advice from personal experience: don't buy big-ass injectors unless you have an ECU that can control them. Your car will be run poorly on and off boost.
Corbin
'95 ESI-T Now with more power and fewer leaks
Gimme fuel...Gimme fire...Gimme that which I desire
#104469, "RE: injectors {incase it was deleted from the market section}" In response to Reply # 11
Originally posted by DR1665
Originally posted by johnny im lookin for either 390 or 450's that shouldnt be too much for around 8 lbs right??
Did you read the links Corbin provided? I'm lookin' for some punctuation and shift key usage.
Obviously not. Wasn't there a calculator program out there somewhere that you could plug in a few figures and it would put you in a close ballpark as to what size injectors you should use for an application?
Erik P. Official 2GNT thread Hijacker Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be... All we know is, He's not The Stig... But he is The Stig's Spartan cousin!
Search
Printer-friendly copy
2 Users in Chat
