I'm swapping out a blown motor. I have the 5 speed and the new motor came out of an auto. which injectors are better? Are they different at all? I'm gonna swap the fuel rail because the rail on the bad motor( my old one) fuel pressure is regulated some where other than on the rail. On the replacement the regulator is on the rail. Is this a good set up or should I continue and just swap them?
Also what is the best way for ME to clean the injcectors and rail?
#103840, "RE: Which injectors?" In response to Reply # 0 Apr-09-07 02:40 PM by cs82685
Originally posted by rself I'm swapping out a blown motor. I have the 5 speed and the new motor came out of an auto. which injectors are better? Are they different at all? I'm gonna swap the fuel rail because the rail on the bad motor( my old one) fuel pressure is regulated some where other than on the rail. On the replacement the regulator is on the rail. Is this a good set up or should I continue and just swap them? Also what is the best way for ME to clean the injcectors and rail? Thanks yall.
Injectors are the same. You can just swap rails. The donor must be from a 95 early 96 model and yours is 96+. Your fpr is back by the tank that's why you're noticing differences
I contributed to the Wiki! EVO IX - just a really expensive boost gauge and a K&N air filter 96 Eclipse RS -awaiting registration and inspection 95 Eclipse GS - parts car Mods/Profile - http://www.2gnt.com/index.php?d=cs82685
#103879, "RE: Which injectors?" In response to Reply # 2
You really shouldn't need to *clean* the fuel rail .... it's gasoline, which is used as a solvent so as it is. If you're talking about the outside of the rail just spray it down with some engine degreaser. I did that when my motor was out and then painted it cherry red. Looked real nice on the car too.
#103881, "RE: Which injectors?" In response to Reply # 3
Originally posted by techboy You really shouldn't need to *clean* the fuel rail .... it's gasoline, which is used as a solvent so as it is. If you're talking about the outside of the rail just spray it down with some engine degreaser. I did that when my motor was out and then painted it cherry red. Looked real nice on the car too.
same here, mine's grabber green!
anybody know other than location what the diff is between the regulators? does one work better than the other?
Erik P. Official 2GNT thread Hijacker Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be... All we know is, He's not The Stig... But he is The Stig's Spartan cousin!
Search
Printer-friendly copy
0 Users in Chat
