okay about a week ago i was down shifting and it went into 1st instead of 3rd and went into 9k and i blew the tranny up so i got a new clutch and a new tranny and it got most of the vibration out but it only does it in first and some at the end of second it rattles in first from about 3 to 7k and i dont know what to do
==TrayTipton= 1996 rs eclipse -obx racing header 4-1 -high flow cat -nopi cat back -tenzo short ram intake >>16.3@87.01<<
#103005, "RE: i need help" In response to Reply # 0 Feb-07-07 04:10 PM by edxmon
try not to downshift into 1st any more? lol sorry, if it "rattles" then either there is something loose or there is something in there that doesnt belong in there...
Originally posted by turbo8u his girl kept looking out and down my car like uh ok we're in this 100 whatever thousand dollar car and that little whatever it is just raped us.... turbo screamed past the window like a vortex of ownage :-P robbing his engine of all the air around, and thats how i like it
Originally posted by ez I came across a huge sack of walnuts in my grandmas garage - I better make use of them.
#103007, "RE: i need help" In response to Reply # 1 Feb-08-07 02:18 AM by Slo2g
How the hell did you get it to go to 9k? Unless your stand alone you cant. Are you sure the tob is in there right? Its a pretty common rattle when people do clutches.
#103011, "RE: i need help" In response to Reply # 4
Ok here is what he is saying Slo, He was shifting from 2nd to 3rd, Proably at something like 45-50 mph and somehow he managed to stuff her into 1st instead of 3rd. When he let out on the clutch the foward motion of the car forced the engine to over rev alot (Possibly past 9k RPM since that's the highest our tach's go). Our transmissions are not designed to handle that kind of revving. and he probably destroyed the input shaft and bearings. Thus causing more damage through out.
On a side note your noise could be coming from your valve trane. stock springs can't handle that kind of revving and could have been damaged. I suggest doing your VC gasket and a thorough inspection of your valve trane.
-Kevin
________________________________________ 95 Eclipse RS - Rolled 96 Eclipse GS - Traded 95 Eclipse GSX- Sold 01 Blazer LS 4.3/5spd dropped and clean DD 88 Camaro RS 361 CID with a 6spd and a bar 10 second street car on motor.
#103012, "RE: i need help" In response to Reply # 4
Originally posted by Slo2g fuel cut at what 7250, and spark a little higher.
Lol, those don't apply the brakes or stop the crankshaft from spinning. The engine is a free-revving device. There's no way to stop physical momentum from making it rev as high as 9k rpm or higher. fuel cut and spark only keep the driver from revving it higher than that.
......................................................................................................................... Built. That's All... ......................................................................................................................... www.monkeybuttpirate.com ......................................................................................................................... 2 Fingers of Scotch with a milk back... Stat!
#103090, "RE: i need help" In response to Reply # 8
I had a customer downshift from 5th doing about 120 right into 1st, dont know how the hell he got it into that gear but it happened, the clutch exploded, took the tranny with it and ripped both ears right off the block, it was a BIG mess, he said his tach was spun the whole way around, suprisingly he didnt grenade the engine but after that it was pretty much useless anyways
#103095, "RE: i need help" In response to Reply # 9
im gonna sound like a jerk, but i dont give a shit. My question is how the fuck do u downshift from 5th to 1st while going 120?? when im going around 35 and try to get it into first it doesnt want to go in that easy (the shift), so how the hell do u get 1st in at 120 ? i have only been driving manual for about some months now, and i know that im not supossed to shift down to first after im past the 35mph line in my car!!!
#103104, "RE: i need help" In response to Reply # 12
Hey let's not start a fight here. There is no need to name call. This forum is to help each other out with problems reguarding our cars. Not to berate each other. If you want to name call or start fights it's too easy. One of the Mods can ban your ass from these boards, and you can start all the fights you want over on tooners.
With that said, people make mistakes, shit happens, and sometimes you misshift, and put it into first with the sloppy ass stock shifters that these cars came with. I had it happen to me in my first eclipse but I didn't let out on the clutch.
-Kevin
________________________________________ 95 Eclipse RS - Rolled 96 Eclipse GS - Traded 95 Eclipse GSX- Sold 01 Blazer LS 4.3/5spd dropped and clean DD 88 Camaro RS 361 CID with a 6spd and a bar 10 second street car on motor.
#103114, "RE: i need help" In response to Reply # 13
Originally posted by shazow1969 Hey let's not start a fight here. There is no need to name call. This forum is to help each other out with problems reguarding our cars. Not to berate each other. If you want to name call or start fights it's too easy. One of the Mods can ban your ass from these boards, and you can start all the fights you want over on tooners.
Very true, that can happen Try to tone it down a little guys and not flex your e-peen here.
You should never be trying to put yyour car in first while moving. Put it into first when you are stopped. It's not good practice to jam it into first.
#103115, "RE: i need help" In response to Reply # 10 Feb-14-07 08:57 AM by Nightfall
Originally posted by barza21 im gonna sound like a jerk, but i dont give a shit. My question is how the fuck do u downshift from 5th to 1st while going 120?? when im going around 35 and try to get it into first it doesnt want to go in that easy (the shift), so how the hell do u get 1st in at 120 ? i have only been driving manual for about some months now, and i know that im not supossed to shift down to first after im past the 35mph line in my car!!!
First instead of third is understandable but why would you even have the shifter near first at 120mph!? You don't start over after you hit 5th lol.
#103108, "RE: i need help" In response to Reply # 1
Originally posted by edxmon try not to downshift into 1st any more? lol sorry, if it "rattles" then either there is something loose or there is something in there that doesnt belong in there...
#103109, "RE: i need help" In response to Reply # 17
Originally posted by donnyb373
Originally posted by edxmon try not to downshift into 1st any more? lol sorry, if it "rattles" then either there is something loose or there is something in there that doesnt belong in there...
god memoriiiiiieeeeeeeeeeeeeeeeeeeeeeeeeeeeees
hahahah, I asked you persmission for that right? i hope so!
Originally posted by turbo8u his girl kept looking out and down my car like uh ok we're in this 100 whatever thousand dollar car and that little whatever it is just raped us.... turbo screamed past the window like a vortex of ownage :-P robbing his engine of all the air around, and thats how i like it
Originally posted by ez I came across a huge sack of walnuts in my grandmas garage - I better make use of them.
Search
Printer-friendly copy
1 User in Chat
Try to tone it down a little guys and not flex your e-peen here. 
i hope so!