ALright guys when i rebuilt my motor i took out the evap system and all that good stuff. i wana know what all vacume lines i can take off besides that and what i can seal the hole on the tb with.

96 GS - 5 Speed
E-bay Cool Air Intake(Short Ram-Add'd K&N Filter)
High Flow Cat
MSD Coil & Wires - NGK Plugs
E-bay Header and Down Pipe
Metal Shifter Barrings-Energy Shifter bushings
Custom 2 1/2 Cat back
Stage 1 Clutch & Tranny
Front&Rear Sway Bars
S-Afc II
55MM TB
17" Alloy Wheels(Gun Metal)
Metalic grey paint-97-99 Conversion-Turbo spoiler
Custom Painted Interior
Rebuilding Engine as of 8-27-06

The throttle body can be welded real quick or you can tap and die the hole and close it that way as for the vacume lines you can look at the factory manual and see what was connected to the evap system and remove those and anything that branched off the evap system can be elilinated and anything that tied in can be capped off.

i know that but i also took off the EGR and on the IM there is a plug on the back left hand side with 3 holes 2 go to a small black boc bolted onto the brackets for the IM do i need those?

96 GS - 5 Speed
E-bay Cool Air Intake(Short Ram-Add'd K&N Filter)
High Flow Cat
MSD Coil & Wires - NGK Plugs
E-bay Header and Down Pipe
Metal Shifter Barrings-Energy Shifter bushings
Custom 2 1/2 Cat back
Stage 1 Clutch & Tranny
Front&Rear Sway Bars
S-Afc II
55MM TB
17" Alloy Wheels(Gun Metal)
Metalic grey paint-97-99 Conversion-Turbo spoiler
Custom Painted Interior
Rebuilding Engine as of 8-27-06

Don't think so whats your model year