| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | vacume Lines |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=102695 |
102695, vacume Lines
Posted by xavier3jr, Jan-15-07 05:07 AM
ALright guys when i rebuilt my motor i took out the evap system and all that good stuff. i wana know what all vacume lines i can take off besides that and what i can seal the hole on the tb with.
|
102696, RE: vacume Lines
Posted by TheGhost, Jan-15-07 12:37 PM
The throttle body can be welded real quick or you can tap and die the hole and close it that way as for the vacume lines you can look at the factory manual and see what was connected to the evap system and remove those and anything that branched off the evap system can be elilinated and anything that tied in can be capped off.
|
102697, RE: vacume Lines
Posted by xavier3jr, Jan-15-07 03:26 PM
i know that but i also took off the EGR and on the IM there is a plug on the back left hand side with 3 holes 2 go to a small black boc bolted onto the brackets for the IM do i need those?
|
102698, RE: vacume Lines
Posted by TheGhost, Jan-16-07 03:58 AM
Don't think so whats your model year
|