#101900, "Could I do this with my wideband o2 kit?"
Hey guys I really want to test out my wideband o2 stuff before I put my turbo on to make sure that it is working properly. Is there any way I can in a sense "integrate" my Bosch wideband o2 sensor into the factory narrowband sensor? For instance, can I take the wires from the stock o2 sensor and splice them into the wires coming from the wideband sensor and still have the car run properly? Just wondering... thanks for reading this and I appreciate the input!
#101902, "RE: Could I do this with my wideband o2 kit?" In response to Reply # 1
FUCK lol, I don't have a clue as to how to weld and the kit comes with one bung, I know I'm a cheap ass I could always buy another bung but I really don't wanna deal with the trouble of taking the downpipe off and having to pay someone to weld the bung on. How much do you think a place like meineke or car-x would charge to do something like that anyway?
#101909, "RE: Could I do this with my wideband o2 kit?" In response to Reply # 3
Some wideband o2 kits have a simulated narrowband output for situations such as this. It allows you to completely remove your factory narrowband o2 sensor and use a wideband o2 sensor, but you have to hook up the wire(s) from the wbo2 controller to the factory o2 harness.
~Luke Facebook 1969 Cougar - 11.91 - 380HP 2007 GSXR 750 1999 OZ - SOLD - 15.26 NA - 14.71 on 75 shot
#101910, "RE: Could I do this with my wideband o2 kit?" In response to Reply # 3
You could do O2 on a stick if you can make the wires reach. You can put it on a clip/pipe/whatever to pick up exhuast out of the muff. Not quite as accurate but works. If that's what you are trying to do.
MB
Captain Caveman
96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq 97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq 98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats 99 OZ 5sp Stocker 15.856 @ 85.97 99 GS stocker auto 17.7@77mph!
#101911, "RE: Could I do this with my wideband o2 kit?" In response to Reply # 2 Nov-16-06 10:27 AM by cs82685
Originally posted by clipse_2005 FUCK lol, I don't have a clue as to how to weld and the kit comes with one bung,
You could always get JB Weld if you really want, I'm debating it. I used it for my egt bung. Of course that's not under the car exposed to the elements, IDK how it would hold up under the car.
Originally posted by cougar694u Some wideband o2 kits have a simulated narrowband output for situations such as this. It allows you to completely remove your factory narrowband o2 sensor and use a wideband o2 sensor, but you have to hook up the wire(s) from the wbo2 controller to the factory o2 harness.
You can also look into this. Then you might not even have to get the bung welded in remove the rear o2 sensor put your wideband sensor in there and hook up the narrowband feature. This is only gonna work if it has a narrowband output though.
I contributed to the Wiki! EVO IX - just a really expensive boost gauge and a K&N air filter 96 Eclipse RS -awaiting registration and inspection 95 Eclipse GS - parts car Mods/Profile - http://www.2gnt.com/index.php?d=cs82685
Search
Printer-friendly copy
2 Users in Chat
