I'm currently looking for new axles. I'm running 310cc injectors with an sfmu. I don't want to run to high of boost till I know what the axles can take. I have had my car at 12-13 lbs on them before for a short while (1 1/2 weeks). I just don't know though if they can support that hp at a drop or under full boost. Any help would be appreciated.

http://www.forcedinductionlv.com/showthread.php?t=3827&page=1&pp=10

though I wouldn't recommend it.

_____________________________________


http://www.dsmregistry.com/detail.php?carid=1133
*form follows function*

IDK how much, but the stockers are absolutely incredible to me. I have 148k on mine and I launch the crap out of them. With slicks. I have been waiting for the other shoe to drop but it just hasn't.

Now, I'm only pushing 170whp but, 148k originals, still holding up.

And while I'm at it, kudos to these tranny's. They hold up to all kinds of crap. 148k on the tranny with speed shifts at 8500! The only problem I had was when I put in an lsd I used the ring gear that was on it (not my original) and it spun the main shaft gear on a hard launch. It turns out that even though these ring gears are supposedly all the the same, the gear that was on there measured an actual 1/16 smaller than my others! Maybe a neon? Terry, any knowledge?

But I digress. Use your originals until/if they break. Then you can get a set of lifetimes from say Advance/Autozone/Napa. Something like $50 (WITH core) each. Or you can get a set of driveshop's axles but those must be around $400 for the set.

MB

Captain Caveman

96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq
97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq
98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats
99 OZ 5sp Stocker 15.856 @ 85.97
99 GS stocker auto 17.7@77mph!

wiki home page:http://www.2gnt.com/index.php?d=bullettdsm

Wheel hop and launching with slicks tend to be the most destructive to axles. If you don't really do either then it's likely your axle failures will be few and far between.

_______

BPU'd skittle

I wish you a smooth break-in and happy driving.

Mod lists here:
http://www.dsmregistry.com/detail.php?carid=1065