Just want to know if anyone knows what all sensors and parts i have to change to put a 95 engine in a 97. So far ive discovered you need to change, coilpack, oil pressure sensor, cam position sensor, fuel injector harness?

also is it neccessary to change fuel rail? or can i just plug the vaccum port on the 95 fuel regualtor off and use that one.

"status as of now " busted420a powered by: 25g, crane cams valve springs retainers, ported head, ported manifold, oversize valves, 60mm tb, je pistions eagle rods, total seal rings,afx pulley, aem cam gears, spearco fmic, turbo xs bov, msd coil and wires, craptech

yeah, ok i know that but the 97 had no engine.

"status as of now " busted420a powered by: 25g, crane cams valve springs retainers, ported head, ported manifold, oversize valves, 60mm tb, je pistions eagle rods, total seal rings,afx pulley, aem cam gears, spearco fmic, turbo xs bov, msd coil and wires, craptech

coo ok i got ya

"status as of now " busted420a powered by: 25g, crane cams valve springs retainers, ported head, ported manifold, oversize valves, 60mm tb, je pistions eagle rods, total seal rings,afx pulley, aem cam gears, spearco fmic, turbo xs bov, msd coil and wires, craptech

I hate to bring up an old thread but I have the same situation as the thread initiator (Swapping 95 motor in a 97 car), and would like some clarification. I was actually suprised there wasn't more info on here regarding swapping 95 motors into later year cars.

So according to DR1665, all that needs to be done to make this work is swap all sensors from the 97 motor to the 95 motor? (Does this include all sensors e.g. TPS, coolant temperature sensor or just certain ones with an impact on fuel and ignition?) Plugging the 95 FPR vacuum line hole won't work will it? Should I remove the 95 FPR and 95 fuel rail for the 97 rail? This will enable me to use the FPR in my 97 back in the tank, correct?

I didn't see a write up anywhere or detailed instructions on the site, but if there is some please share with me!

Any help appreciated

Use all the sensors and fuel pieces from the 97 engine. Most of the 95 sensors won't even plug in, and the fuel will be all screwy if you try to use the 95 rail and injectors because of the return style rail and larger injectors.

Erik P.
Official 2GNT thread Hijacker
Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be...
All we know is, He's not The Stig... But he is The Stig's Spartan cousin!

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

Thanks for the help