ok....before i replaced the clutch i was having problem shifting at or after 6k. and to get it into gear nice and easy i had to push the clutch down to the firewall...i could hear my throw out bearing so i assumed that was the problem.
KNOW, i just got my clutch replaced with another used stock clutch which i bought from dmbonric who apperently said the clutch had no more then 30k and wasnt abused at all and also replaced the throw out bearing. after the clutch is fucking worse.. i lliterally have to force it into gear..doesnt matter which gear.....only time i can get to go in fairly easy is by pumping the clutch a few times....also i notice that the clutch gets alittle more stiffer when pumping...also the clutch is to lite and catches low as hell...i have no clue wat it could be.....PLEASE HELP
PS...I WAS AT THE GAS STATION....and i had the clutch down in first and the car was moving forward...lol...i was like wtf.
#4763, "RE: wont go into gear?" In response to Reply # 0
Your need to bleed your clutch hydralics. Sounds like you have some air in the system.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#4764, "RE: wont go into gear?" In response to Reply # 1
well...im sure its not the slave cylinder or master cylinder...checked both of them only thing i got was "gunk" out of the slave cylinder nothing else......the car has been bled plenty of times with no positive result....so im assuming flywheel, clutch pressure plate? any other suggestions would be greatly appreciated. thanks
#4765, "RE: wont go into gear?" In response to Reply # 2
CORRECTION.....the guy that did my clutch didnt bleed it intially after he finishing putting the tranny up....once he noticed how he had to force the gears in he bleed it 3-4 times and declared it was fucked....though he says when he bleed the clutch the clutch would get harder but once he started the car the shit would have those problems. thanks
#4767, "RE: wont go into gear?" In response to Reply # 3
Check for leaks...
I had the same problem, it would get stiffer, I would turn on the car and drive half a block before it would go out again... Check the line, they have a huge tendency to leak. I have had to replace 2 already...
#4771, "RE: wont go into gear?" In response to Reply # 4
which line are your talking bout? Also should the slave even have "gunk" in it....its black thick shit....so im thinking maybe that crap is clogging the slave or something...let me know what u guys think thanks
Search
Printer-friendly copy
0 Users in Chat
