|
go under your hood. on the far right side as your looking at it, you'll see your clutch master cylinder. its right on the firewall and has a nonthreaded white cap. pop that off and see if there is any fluid in there. if there isn't, go get some dot3 clutch fluid or brake fluid and put it in there and bleed ur clutch. ull need a bleeder kit or a friend to push the pedal while you work the little valve by the slave cylinder. if your pedal feels soft, or engages high on the pedal than this could be why. otherwise, see if you need to tighten up your shifting linkage. Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here
If still nothing, your trying to hard. Start over at step 1.
|
Search
Printer-friendly copy
1 User in Chat
