#2929, "Possible fix for tranny rattle...let me know what you think."
Alright, I know that many of us have a tranny rattle and I have heard that its pretty much associated with aftermarket clutches.
In my particular case ( CM stage 4 ) the fingers on the pressure plate were not level all the way around. I am pretty sure they are supposed to be. Anyway, I think that the fact that the fingers sit unevenly around the inside of the pressure plate that they hit the TOB causing it to rattle.
Now the slave cylinder has a small rod that pushes on the clutch fork which holds the TOB. It seems to hold it with some pretty good pressure, causing it to sit very close, and in my case, contact the fingers on the pressure plate...causing the rattle.
My thought is that if I shave the little rod on the slave cylinder a little bit to make it shorter, it would not allow the TOB to sit so close to the pressure plate. HOPEFULLY fixing the rattle, and prevent premature TOB wear.
Does this make sense to anyone else? See any possible problems with doing this?
#2930, "RE: Possible fix for tranny rattle...let me know what you think." In response to Reply # 0
Originally posted by 95greenhrcgs See any possible problems with doing this?
No offense or anything, but you don't have any idea how a throwout bearing actually works, do you?
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#2937, "RE: Possible fix for tranny rattle...let me know what you think." In response to Reply # 2
your clutch hydraulic system is much liek your braks caliper. the slave cylinder piston is pushed back into the cylinder so if you shave the rod it will not make a difference.
Clutch chatter my friend is a common issue with any car. It is not so much the TOB but the clutch design. Do a search on the internet, most all data points to the clutch engineering and a cause of flaws in the pressure plate or flywheel. You sometime can make the chatter go away by pushing in the clutch and letting it back out.....this is because you are allowingthe disk to re-seat itself in a better spot. There is nothing you can do but install better speakers so you dont hear it....lol
Be careful with your reply i sense Dino is winding up with a good ol Noob slap......lol
Terry
96 Eagle talon ESI Star Stage II - Boost/oil/EGT gauges
#2938, "RE: Possible fix for tranny rattle...let me know what you think." In response to Reply # 3
I always for get one idea to add everytime i post.....
Here is one more thing to think about.....if you shave the clutch rod, the next time you push in the clutch pedal the Clutch fork will be pushed in less causing the TOB to be pushed in less. Next you got it...the clutch plate spring is pushed in less. You may end up with a clutch that begins to drag everytime you try and shift....grinding gears you will go.
Hope this help.
Terry 96 Eagle talon ESI Star Stage II - Boost/oil/EGT gauges
#2944, "RE: Possible fix for tranny rattle...let me know what you think." In response to Reply # 5 Jun-11-04 05:57 AM by DarkOne
Originally posted by 95greenhrcgs Thanks. I see what you are saying. I guess I really didnt think everything through. As for Dino, I am not worried. He can be harsh sometimes, but he knows his shit and is actually pretty cool, especially in person. Thanks for pardoning my ignorance. Jon
I wasn't going to be mean. Simply put, the whole POINT of the TOB is to allow a movable interface between a spinning clutch pressure plate and a stationary clutch fork. It's DESIGNED to touch the pressure plate. They don't rattle because they touch, they rattle because they: 1) need lubrication 2) are loose in the fork 3) are in need of replacement. My money is leaning towards 90% of the people with TOB noise just not seating it in the fork properly. Your issue sounds more clutch related than TOB related.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#2952, "RE: Possible fix for tranny rattle...let me know what you think." In response to Reply # 7
i think lots of people just got pwn3d with dinos answer... pfff, "everyone has the tob problem" bwwahahaha. ahem.
Having Problems? Heres my Three step solution to anything 2gnt related. Step 1: Put down everything in your hands. Step 2: Grab a lucky strike, Smoke it. Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you. If not. Go here: here
If still nothing, your trying to hard. Start over at step 1.
Search
Printer-friendly copy
3 Users in Chat
