ok.. ive been getting what i think is clutch chatter. when the car is cold i have this grinding noise coming from the tranny. if i put my foot on the clutch, the noise goes away. when the car warms up the noise goes away.. however.. every now and then im noticing that when im boosting the noise comes back.

i have a clutchmasters stage 3 clutch. i was reading in another post that with these clutches you need to drive to somewhat fast.. like you can't slip the clutch to move the car or else you will grind the teeth in the clutch.

is this true?

what can i do to stop this noise? could it be something else like the throw out bearing? if youd like i can take a vid of the noise so you can hear the sound.

thanx
james

Ok, this is what im told. The chatter your heard could be from either the clips on the throwout bearning not being sucured properly or you may need to put some high temp grease on some spots you might have missed. I assume you used at least some grease right??? BTW, its better to have a little chatter do to not quite enough grease then having to much causing you clutch to slip and turn to crap I hope I helped a little. Someone else feel free to chime in.

-Travis

well, i pulled the motor.. there wasn't much grease on the inside spindle, i put grease on it and buttoned it back up.. started the car, same noise only quieter

did you check the clips on the throwout bearing??? Were they broken or anything????? Can anyone else help him??

-Travis

I have had the same noise with my car. If anyone knows what the sound is please help us.

Clutches don't have "teeth" to grind. They have a friction disk, and a surface it has to grab. Whoever told you that you were grinding clutch "teeth" should be listened to with a grain of salt from here on out. However, the throwout bearing rides on "teeth" on the pressure plate, so perhaps its an issue of semantics.

Chances are it's just a throwout bearing. they are typically noisy in these cars and that's normal.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

Well if its the throwout bearing i will let ya know. Im waiting anyday now for my Spec stage 3 to come in.

I've had that throwout bearing grinding problem too, ask Dino. I've had it on my car for the last 2 yrs, no serious probs. 120k original clutch, but now it's starting to make a high pitch shrill when i push the clutch in. If you notice, the "grinding noise" goes away when the engine is warmed up, though, right?

https://www.kaptainmyke.com