wheres the bleed screw?!! clutch has no pressure after refilling fluid resi. does someone have a pic or good instructions as to where it is and how to bleed it. thanks.

The bleed screw is on the slave cylinder (the little guy with the boot between the tranny and the radiator.

Just get a bleed tube (you can get one from any auto parts store), and fill your resivor with DOT 3 brake fluid.

While a helper is in the car, open the bleed screw, have him push the pedal all the way down (and hold it there). Then close the bleed screw. Then have him/her let the pedal up. Repeat this process until tno air, and pure clean fluid comes out.

Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician